Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 32 GB DDR4 kit with four 8 GB UDIMM modules running at 2933 MHz CL21 for Supermicro systems
This 32GB kit contains four 8GB DDR4 UDIMM modules rated at 2933MHz with CL21 latency. It is built for Supermicro desktop and SuperWorkstation motherboards such as the MBD-C9X299-PGF. The non-ECC unbuffered design suits systems that do not require error correction.
The modules run at the standard 1.20V DDR4 voltage and use a 1Rx8 organisation with major OEM chips. No heat spreaders are fitted, so the kit relies on case airflow for cooling. Power draw and noise remain at typical DDR4 levels for this voltage and density.
The package delivers the four matched modules ready for installation in the 288-pin slots. No additional software, cables or brackets are included. The supplier backs the kit with a lifetime replacement warranty and US-based technical support.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NEMIX RAM |
| Product line | SuperMicro Server/Workstation Compatible Series Memory |
| Model name | SuperMicro DDR4 2933 MHz Non-ECC Unbuffered UDIMM |
| Part number | MD23400-818K4 |
| Total capacity | 32 GB (4 × 8 GB) |
| Product type | 288-Pin DDR4 UDIMM |
| Performance | |
| Rated speed | DDR4 2933 (PC4 23400) |
| Processor | |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Memory | |
| CAS latency | CL21 |
| ECC support | No |
| Buffer type | Unbuffered |
| Heat spreader | No |
| Memory rank | 1Rx8 |
| Power | |
| Rated voltage | 1.2 V |
| Compatibility | |
| Compatible systems | Supermicro |
| In the box | |
| Included items | 32 GB (4 × 8 GB) DDR4 2933 MHz PC4-23400 1Rx8 1.2 V CL21 288-PIN Non-ECC Unbuffered UDIMM KIT |
Power off, open the case, align each module notch with the slot key, press down until both retention clips click, then verify in BIOS that all 32 GB run at 2933 MHz CL21; the step often missed is seating every module fully so both clips engage.
No scheduled maintenance is required; keep slots dust-free and ensure airflow. If a module fails, the lifetime replacement warranty covers it — swap the faulty stick for a new one.
The CL21 latency at 2933 MHz and 1.20 V sets the throughput ceiling; sustained loads hit that timing boundary before voltage or thermal limits become a factor.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?