We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 32GB 4x8GB DDR4 3200 CL22 ECC RDIMM Tyan Transport CX GC68A-B8036-LE

SKU CH-KMQ0-XV8HA

32 GB DDR4 3200 CL22 ECC registered RDIMM kit of four 8 GB modules for Tyan Transport CX GC68A-B8036-LE servers

  • Total capacity32 GB (4 × 8 GB)
  • Rated speedDDR4 3200 (PC4 25600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL22
  • Buffer typeRegistered
  • Rated voltage1.2 V
  • 32 GB capacity in four 8 GB modules for multi-channel bandwidth
  • DDR4 3200 speed rated at PC4-25600 for server throughput
  • ECC registered RDIMM with CL22 latency protects data integrity
  • 2 V operation at 1Rx8 rank reduces power draw
  • Validated for Tyan Transport CX GC68A-B8036-LE motherboard

Tyan Transport CX GC68A-B8036-LE memory kit

This 32 GB kit provides four 8 GB DDR4 3200 ECC registered DIMMs validated for the Tyan Transport CX GC68A-B8036-LE platform. The modules operate at 1.2 V with CL22 latency and use a 1Rx8 organisation. They are built with major OEM chips from Samsung, Micron or Hynix and carry no heat spreader.

Capacity and registered ECC headroom

The 32 GB total capacity suits multi-socket server workloads that benefit from error correction and registered signalling. Four ranks populate the board evenly, leaving additional slots open for future expansion when the platform supports higher totals. Workloads exceeding this capacity will require higher-density modules or a board with more slots.

Build integration for registered DDR4 systems

Each module uses the standard 288-pin DDR4 RDIMM form factor and runs at the JEDEC 1.2 V level. The registered design reduces electrical load on the memory controller, helping stability in dense configurations. No heat spreader means clearance is minimal, but airflow across the bare PCB must be provided by the chassis. Ensure the motherboard firmware supports registered ECC DIMMs before installation.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $307.99
Typical for this category: the median of 21,161 items is $397.99.
Total capacity 32 GB (4 × 8 GB)
Typical for this category: the median of 20,941 items is 32 GB.
Price per GB $9.62 per GB
Typical for this category: the median of 20,941 items is $8.19 per GB.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineTyan Server/Workstation Motherboard Compatible Series Memory
Model nameTyan DDR4 3200 MHz ECC RDIMM Registered Server Memory
Part numberMR25600-818K4
Total capacity32 GB (4 × 8 GB)
Product type288-Pin DDR4 RDIMM
Performance
Rated speedDDR4 3200 (PC4 25600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL22
ECC supportYes
Buffer typeRegistered
Heat spreaderNo
Memory rank1Rx8
Power
Rated voltage1.2 V
Compatibility
Compatible systemsTyan
In the box
Included items32 GB (4 × 8 GB) DDR4 3200 MHz PC4-25600 1Rx8 1.2 V CL22 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

Will these 3200 CL22 registered ECC DIMMs run stably alongside older DDR4 RDIMMs already installed in my Tyan Transport CX?

The modules operate at 3200 MT/s with CL22 latency and 1.20 V. When mixed with slower DDR4 RDIMMs the system will typically clock all channels down to the lowest common speed and tightest timing, so stability depends on the motherboard's memory controller and BIOS.

How can I verify the 32 GB kit is recognised and running at 3200 MT/s with ECC active after installation?

Enter the BIOS or UEFI and check the memory information screen — it should show 32 GB total, 3200 MT/s (PC4-25600), CL22, 1.20 V, registered ECC mode enabled. In the OS, tools such as dmidecode on Linux or CPU-Z on Windows will confirm speed, rank (1Rx8) and ECC status.

What exactly ships in the box and do I need any extra brackets, cables or cooling for the 288-pin RDIMMs?

The package contains four 8 GB DDR4 3200 CL22 1.20 V 288-pin ECC registered DIMMs — no heat spreaders, brackets, cables or additional cooling are included or required for standard server chassis airflow.

More in Model-Specific Memory Upgrades

Similar items