Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
32 GB DDR4 2666 ECC registered RDIMM built for Synology SA3400 NAS expansion
This NEMIX RAM module adds 32GB of DDR4 2666 ECC registered memory to a Synology SA3400 NAS. It arrives as a single 288-pin RDIMM rated at 1.2V with CL19 latency and a 2Rx4 rank configuration. The part number MR21300-324K1 confirms factory validation for the target platform.
The module suits administrators who need to expand the memory of a Synology SA3400 for virtualisation, file services or database workloads that benefit from error-correcting registered DIMMs. It is not intended for consumer desktops, laptops or unbuffered UDIMM slots, and it cannot be used in systems that require non-ECC or load-reduced memory.
The decisive specification is the 32GB capacity delivered on one RDIMM, which determines the maximum memory per slot on the SA3400. If the chassis has multiple slots, each can accept an identical module, but a single stick cannot exceed this density. Buyers must verify the platform's total slot count and maximum supported memory before ordering.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NEMIX RAM |
| Product line | Synology Compatible Series NAS Memory |
| Model name | Synology DDR4 2666 MHz ECC RDIMM Registered Server Memory |
| Part number | MR21300-324K1 |
| Total capacity | 32 GB |
| Product type | 288-Pin DDR4 RDIMM |
| Performance | |
| Rated speed | DDR4 2666 (PC4 21300) |
| Processor | |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Memory | |
| CAS latency | CL19 |
| ECC support | Yes |
| Buffer type | Registered |
| Heat spreader | No |
| Memory rank | 2Rx4 |
| Power | |
| Rated voltage | 1.2 V |
| Compatibility | |
| Compatible systems | Synology |
| In the box | |
| Included items | 32 GB (1 × 32 GB) DDR4 2666 MHz PC4-21300 2Rx4 1.2 V CL19 288-PIN ECC RDIMM Registered Server Memory |
Yes, the module is a 288-pin DDR4 RDIMM designed specifically for the Synology SA3400 NAS, so it matches the slot keying and electrical requirements of that system.
Power down the NAS, open the chassis, align the notch on the 288-pin edge connector with the slot key, press firmly until both retention clips click, then verify in DSM that the full 32 GB is recognised at 2666 MHz with ECC active.
The module uses major OEM Samsung, Micron or Hynix chips rated for continuous server operation; under normal thermal conditions it typically lasts the life of the NAS, and ECC will correct single-bit errors before they affect data integrity.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?