We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 32GB DDR4 2666MHz CL19 2Rx8 1.2V 288-pin UDIMM memory upgrade

SKU CH-RQPX-W9G39

32 GB DDR4 module rated at 2666 MHz with CL19 latency and 1.2 V operation for compatible Supermicro desktop systems

  • Total capacity32 GB
  • Rated speedDDR4 2666 (PC4 21300)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL19
  • Buffer typeUnbuffered
  • Rated voltage1.2 V
  • 32GB capacity expands desktop workstation memory headroom
  • DDR4 2666MHz speed matches SuperMicro motherboard specifications
  • CL19 latency supports stable operation under sustained loads
  • 2V voltage reduces power draw and heat output
  • 2Rx8 288-pin UDIMM form factor ensures direct compatibility

NEMIX RAM 32GB DDR4 2666MHz UDIMM

This 32GB DDR4 module runs at 2666MHz with CL19 latency and 1.2V operation. It is built as a 2Rx8 unbuffered non-ECC UDIMM using major OEM chips from Samsung, Micron or Hynix. The kit targets Supermicro desktop and workstation motherboards such as the MBD-C9Z390-CG for memory capacity upgrades.

288-pin unbuffered design without heat spreader

The standard 288-pin DDR4 UDIMM form factor fits directly into compatible desktop DIMM slots without registration or buffering. Absence of a heat spreader keeps the module low-profile for tight clearance around large CPU coolers. Single-module packaging allows flexible population of available slots on supported Supermicro boards.

Verify DDR4 2666 support

Confirm the motherboard accepts DDR4 2666MHz non-ECC unbuffered UDIMMs and supports 32GB density per slot before ordering. Check the system manual for qualified vendor lists and population rules that may limit rank configuration or total memory. Ensure the platform does not require registered or ECC modules for stable operation.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $140.99
Cheaper than about 63% of the 21,161 comparable items (median $397.99).
Total capacity 32 GB
Typical for this category: the median of 20,941 items is 32 GB.
Price per GB $4.41 per GB
Cheaper than about 82% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineSuperMicro Server/Workstation Compatible Series Memory
Model nameSupermicro DDR4 2666 MHz Non-ECC Unbuffered UDIMM
Part numberMD21300-328K1
Total capacity32 GB
Product type288-Pin DDR4 UDIMM
Performance
Rated speedDDR4 2666 (PC4 21300)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL19
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.2 V
Compatibility
Compatible systemsSupermicro
In the box
Included items32 GB (1 × 32 GB) DDR4 2666 MHz PC4-21300 2Rx8 1.2 V CL19 288-PIN Non-ECC Unbuffered UDIMM

Questions about this item

Does the DDR4 2666 PC4-21300 interface cap real-world throughput at the rated speed?

The module runs at DDR4 2666 MT/s (PC4-21300). Throughput is limited by the motherboard memory controller and the slowest DIMM installed.

What physical slot and clearance does the 288-pin UDIMM need?

It requires a standard 288-pin DDR4 UDIMM slot. No heat spreader is fitted, so low-profile CPU coolers will not interfere.

How is the module installed and which step is often missed?

Align the notch with the slot key, press down until both retention clips click. The step often missed is verifying the clips fully lock on each side.

More in Model-Specific Memory Upgrades

Similar items