Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
32 GB DDR4 2933 MHz ECC registered DIMM for HPE servers, 2Rx4 CL21 at 1.2 V
This 32GB DDR4 2933MHz ECC RDIMM module is built for HPE servers and workstations that require registered memory with error correction. It operates at 1.2V with a CL21 latency and uses a 2Rx4 rank configuration across 288 pins. The part is validated for part numbers P00924-X21, P00924-H21 and P00924-K21.
Modules are rigorously stress tested under load to ensure reliability in mission-critical environments. Registered buffering and ECC maintain data integrity during continuous operation. Major OEM chips from Samsung, Micron or Hynix provide consistent signal quality across the PC4-23400 interface.
Verify that your HPE system supports DDR4 2933MHz registered ECC RDIMMs and accepts a 2Rx4 32GB module in the target slot. Confirm the motherboard voltage is set for 1.2V DDR4 and that the memory population rules allow the desired capacity per channel. Consult the system manual for approved configurations before ordering.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NEMIX RAM |
| Product line | HPE Server/Workstation Compatible Series Memory |
| Model name | HPE DDR4 2933 MHz ECC RDIMM Registered Server Memory |
| Part number | MR23400-324K1 |
| Total capacity | 32 GB |
| Product type | 288-Pin DDR4 RDIMM |
| Performance | |
| Rated speed | DDR4 2933 (PC4 23400) |
| Processor | |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Memory | |
| CAS latency | CL21 |
| ECC support | Yes |
| Buffer type | Registered |
| Heat spreader | No |
| Memory rank | 2Rx4 |
| Power | |
| Rated voltage | 1.2 V |
| Compatibility | |
| Compatible systems | HPE |
| In the box | |
| Included items | 32 GB (1 × 32 GB) DDR4 2933 MHz PC4-23400 2Rx4 1.2 V CL21 288-PIN ECC RDIMM Registered Server Memory |
The module operates at 1.2V standard DDR4 voltage. Registered DIMMs add minimal overhead versus unbuffered types. Actual power draw depends on workload intensity and the host platform memory controller.
A server or workstation motherboard with 288-pin DDR4 RDIMM slots and registered ECC support is required. The module is validated for HPE systems using part numbers P00924-X21, P00924-H21 and P00924-K21.
Yes, the memory controller will down-clock all modules to the lowest common speed and tightest timings. Population rules for the specific HPE platform still apply; check the server manual for supported rank configurations.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?