We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips, 260-pin SODIMM form factor

NEMIX RAM

NEMIX RAM 32GB DDR4 2933MHz PC4-23400 2Rx8 CL21 260-PIN SODIMM memory upgrade

SKU CH-X353-R6KKG

32 GB DDR4 SODIMM at 2933 MHz CL21 1.2 V 2Rx8 verified for Supermicro X12SCV motherboards

  • Total capacity32 GB
  • Rated speedDDR4 2933 (PC4 23400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL21
  • Rated voltage1.2 V
  • Buffer typeUnbuffered

Size 32GB

  • 32 GB capacity doubles memory headroom for demanding workloads
  • DDR4 2933 MHz speed matches the controller spec for full rated throughput
  • CL21 latency and 1.2 V voltage align with the platform's timing expectations
  • 2Rx8 rank on 260-pin SODIMM fits the Supermicro X12SCV-W and X12SCV-LVDS boards
  • Built with Samsung Micron or Hynix chips and tested for stability at rated settings

Exact-match upgrade for Supermicro systems

This 32 GB DDR4 SODIMM module runs at 2933 MHz with CL21 timing and 1.2 V operation. The 2Rx8 rank structure matches the memory controller expectations of the Supermicro X12SCV-W and X12SCV-LVDS motherboards. It installs as a single 260-pin unbuffered non-ECC stick for immediate capacity recognition.

Low-voltage operation keeps thermals simple

At 1.2 V the module draws minimal power and produces little heat without a heat spreader. Passive cooling inside a typical laptop or compact chassis is sufficient for sustained loads. The standard DDR4 voltage also avoids extra strain on the system's power delivery circuitry.

Fits the 260-pin SODIMM slot your board requires

The unbuffered form factor matches the physical and electrical specification of the target Supermicro platforms. No desktop UDIMM or registered DIMM will work in these sockets. Builders needing ECC support or higher densities per slot must look elsewhere because this kit provides a single non-ECC rank configuration.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $182.99
Cheaper than about 59% of the 21,161 comparable items (median $397.99).
Total capacity 32 GB
Typical for this category: the median of 20,941 items is 32 GB.
Price per GB $5.72 per GB
Cheaper than about 68% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR4 Non-ECC Unbuffered SODIMM Memory
Part numberMS23400-328K1
Total capacity32 GB
Product type260-Pin DDR4 SODIMM
Performance
Rated speedDDR4 2933 (PC4 23400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL21
ECC supportNo
Buffer typeUnbuffered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.2 V
Compatibility
Compatible systemsSupermicro
In the box
Included items32 GB DDR4 2933 MHz PC4-23400 2Rx8 1.2 V 260-PIN Non-ECC SODIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

How do I install the 260-pin SODIMM and what step is often missed?

Align the notch on the module with the slot key, insert at a slight angle, then press down until both side clips snap shut; the step often missed is fully seating both clips so the module sits flat and makes solid contact.

What maintenance or replacement will this DDR4 module need later?

No routine maintenance is required; if a chip fails the module is replaced under lifetime support, otherwise it remains in service for the system's usable life.

What limit appears first under sustained load with CL21 1.20 V DDR4-2933?

The CAS latency of 21 cycles at 1.20 V sets the timing ceiling; sustained workloads hit that latency bound before voltage or thermal limits become a factor.

More in Model-Specific Memory Upgrades

Similar items