We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board SODIMM module with black memory chips, 260-pin DDR4 form factor, no heat spreader

NEMIX RAM

NEMIX RAM 32GB DDR4 3200 CL22 260-PIN SODIMM for POSIFLEX XT-8315 JIVA memory upgrade

SKU CH-AEN0-FB53P

32 GB DDR4 3200 SODIMM module for POSIFLEX XT-8315 JIVA terminals, CL22 1.2 V unbuffered non-ECC

  • Total capacity32 GB
  • Rated speedDDR4 3200 (PC4 25600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL22
  • Buffer typeUnbuffered
  • Rated voltage1.2 V
  • 32 GB capacity boosts POS terminal multitasking
  • DDR4 3200 speed accelerates transaction processing
  • CL22 latency ensures stable fanless operation
  • 20 V low voltage reduces thermal load
  • 260-pin SODIMM fits XT-8315 JIVA exactly

POSIFLEX XT-8315 JIVA DDR4 upgrade

This 32 GB DDR4 3200 SODIMM is built specifically for the POSIFLEX XT-8315 JIVA fanless POS terminal. It delivers a single-module capacity increase for systems running memory-intensive retail or hospitality software. The non-ECC unbuffered design matches the platform's native memory architecture. Installation follows the standard SODIMM slot procedure for this device.

260-pin CL22 1.2 V module profile

The stick uses a 260-pin edge connector and operates at the standard DDR4 1.20 V, drawing minimal power inside the sealed chassis. With no heat spreader, the low-profile PCB fits the tight clearances of the fanless enclosure without blocking airflow paths. Major OEM chips from Samsung, Micron or Hynix are validated under load for continuous operation. CL22 latency aligns with the terminal's memory controller timing.

Replaces lower-capacity factory SODIMMs

Upgrading from the original 4 GB or 8 GB modules removes the bottleneck that causes slow transaction screens and delayed database syncs. The jump is worth it when daily sales logs, loyalty lookups and peripheral drivers push the system into swap. Buyers who need ECC protection or registered buffering for server-grade error correction cannot use this module.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $162.99
Cheaper than about 60% of the 21,161 comparable items (median $397.99).
Total capacity 32 GB
Typical for this category: the median of 20,941 items is 32 GB.
Price per GB $5.09 per GB
Cheaper than about 75% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product linePOSIFLEX POS Series Point of Sale Kiosk Memory
Model namePOSIFLEX POS DDR4 3200 MHz Non-ECC Unbuffered SODIMM
Part numberMS25600-328K1
Total capacity32 GB
Product type260-Pin DDR4 SODIMM
Performance
Rated speedDDR4 3200 (PC4 25600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL22
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.2 V
Compatibility
Compatible systemsPOSIFLEX POS
In the box
Included items32 GB (1 × 32 GB) DDR4 3200 MHz PC4-25600 2Rx8 1.2 V CL22 260-PIN Non-ECC Unbuffered SODIMM

Questions about this item

Does the DDR4 3200 PC4-25600 interface cap the module at 3200 MT/s in the POSIFLEX XT-8315 JIVA?

Yes, the DDR4 3200 PC4-25600 rating means the module runs at up to 3200 MT/s; the system memory controller will not exceed that speed.

What physical slot and pin count does this 260-pin SODIMM need to fit the POSIFLEX terminal?

It requires a single 260-pin DDR4 SODIMM slot, which is the standard socket used in the POSIFLEX XT-8315 JIVA.

How is the 2Rx8 CL22 module installed, and what step do people often miss?

Power off the terminal, open the memory cover, insert the module at an angle until the gold contacts disappear, then press down until the side clips click; the step often missed is fully seating it so both clips lock.

More in Model-Specific Memory Upgrades

Similar items