We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 32GB DDR5 4800 ECC RDIMM CL40 2Rx8 Micron Compatible

SKU CH-1NBP-FA7QM

32 GB DDR5-4800 ECC registered DIMM, CL40, 2Rx8, 1.1 V, 288-pin for Micron servers

  • Total capacity32 GB
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Buffer typeRegistered
  • Rated voltage1.1 V
  • 32 GB capacity supports large server workloads
  • DDR5 4800 speed delivers high data throughput
  • ECC registered design protects data integrity
  • 1 V operation reduces power consumption
  • 2Rx8 dual-rank layout optimises memory density

32 GB DDR5 4800 ECC RDIMM

This 32 GB DDR5 4800 module is an ECC registered DIMM built for Micron-compatible servers and workstations. It runs at 1.10 V with a CAS latency of CL40 and uses a 2Rx8 organisation on a 288-pin PCB. The stick is designed for environments that require error correction and registered signalling.

Suited for Micron server upgrades.

IT teams maintaining Micron-qualified platforms can use this module to add 32 GB of registered ECC capacity. Builders putting together consumer desktops, laptops or unbuffered workstations should look elsewhere because the registered interface and ECC function are not supported on those boards.

Registered ECC RDIMM interface decides fit

The single specification that determines compatibility is the registered ECC RDIMM interface. Only motherboards and server platforms that explicitly accept DDR5 4800 registered ECC modules with a 2Rx8 layout will recognise and run this memory correctly.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $966.99
Pricier than about 60% of the 21,161 comparable items (median $397.99).
Total capacity 32 GB
Typical for this category: the median of 20,941 items is 32 GB.
Price per GB $30.22 per GB
Pricier than about 86% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineMicron Server/Workstaion Compatible Series Memory
Model nameMicron DDR5 4800 MHz ECC RDIMM Registered Server Memory
Part numberMR38400-328K1
Total capacity32 GB
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportYes
Buffer typeRegistered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.1 V
Compatibility
Compatible systemsMICRON
In the box
Included items32 GB (1 × 32 GB) DDR5 4800 MHz PC5-38400 2Rx8 1.1 V CL40 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

How do I install this 288-pin DDR5 RDIMM in a Micron-compatible server, and what step is often missed?

Power down the server, open the chassis, align the notch on the 288-pin module with the slot key, press firmly until both ejector clips click, then verify in BIOS that the 32GB module is recognised at 4800 MT/s with ECC enabled.

What maintenance or replacement will this registered ECC module need during its service life?

The module has no moving parts and no heat spreader; keep server air filters clean so airflow stays adequate for the 1.1V DRAM. If a correctable ECC error count rises sharply, replace the DIMM — otherwise it runs for the system lifetime.

What limit appears first when this CL40 2Rx8 RDIMM runs sustained workloads?

The CAS latency of CL40 at 4800 MT/s sets the baseline response time; under continuous load the memory controller’s thermal throttling or the 1.10V voltage ceiling will cap sustained throughput before the module itself fails.

More in Model-Specific Memory Upgrades

Similar items