We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 32GB DDR5-5600 2Rx8 CL46 1.1V RDIMM ECC Supermicro H13DSG-O-CPU memory upgrade

SKU CH-FGXP-C9QN3

32 GB DDR5-5600 registered ECC RDIMM, 2Rx8 CL46 at 1.1 V, validated for Supermicro H13DSG-O-CPU motherboards

  • Total capacity32 GB
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • Exact DDR5-5600 CL46 1.1 V spec matches Supermicro H13DSG-O-CPU memory controller
  • Registered 2Rx8 ECC RDIMM offloads controller and corrects single-bit errors
  • 32 GB single-module kit installs in the required 288-pin RDIMM slots
  • Built with Samsung Micron Hynix chips for enterprise-grade reliability
  • Lifetime replacement warranty with US-based technical support included

Exact-match upgrade for Supermicro H13DSG-O-CPU

This 32GB DDR5 RDIMM is built to the precise rank, voltage, and timing the server's memory controller expects. It is recognised at full capacity and runs at its rated speed without manual tuning. The registered ECC design is intended for enterprise workloads that demand data integrity. It fits the 288-pin slots this motherboard requires.

Capacity and headroom

A single module provides 32GB of registered memory with ECC protection. The 2Rx8 organisation allows full-slot population while the buffered architecture offloads the memory controller. CL46 latency at 5600 MT/s delivers the throughput the platform specifies. Systems needing more than 32GB per slot or lower latency than CL46 will not be satisfied by this part.

DDR5 5600 registered ECC RDIMM

The module operates at 1.1V with a CAS latency of 46 and a 2Rx8 rank configuration. These exact specifications decide whether the memory is compatible with the target motherboard. Verify your system manual for supported capacities and population rules before purchase.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $1,065.99
Pricier than about 61% of the 21,161 comparable items (median $397.99).
Total capacity 32 GB
Typical for this category: the median of 20,941 items is 32 GB.
Price per GB $33.31 per GB
Pricier than about 90% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-328K1
Total capacity32 GB
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items32 GB DDR5 5600 MHz PC5-44800 2Rx8 1.1 V 288-PIN ECC RDIMM KIT

Questions about this item

Will this 288-pin DDR5 RDIMM work alongside existing RDIMMs in my Supermicro H13DSG-O-CPU?

The module is spec-matched to the board's population rules; install it in the next approved slot following the manual's sequence for full-capacity recognition.

How can I confirm the 32GB DDR5-5600 ECC Registered module is operating correctly after installation?

Check the BIOS memory information screen to confirm 32GB detected at 5600MHz with ECC active, then run a memory diagnostic to verify stability.

What does the package contain and is anything else required to use this MR44800-328K1 kit?

The box includes the 32GB DDR5 5600MHz 2Rx8 1.1V CL46 ECC RDIMM; no extra parts are needed for installation in a compatible Supermicro H13DSG-O-CPU system.

More in Model-Specific Memory Upgrades

Similar items