We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips, no heat spreader, gold edge connector, 288 pins, DDR5 RDIMM module

NEMIX RAM

NEMIX RAM 32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V CL46 288-PIN ECC Registered RDIMM memory upgrade

SKU CH-JGTM-43706

32GB DDR5 5600MHz ECC Registered RDIMM built for the Supermicro X14SDV-32C-SP3F motherboard

  • Total capacity32 GB
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 32GB

  • Exact 32 GB DDR5-5600 (PC5-44800) spec match ensures full-capacity recognition at rated speed
  • 288-pin Registered RDIMM form factor fits the Supermicro X14SDV-32C-SP3F motherboard DIMM slots
  • Registered 2Rx8 architecture offloads the memory controller for fully populated slot operation
  • ECC corrects single-bit errors on the fly to prevent silent data corruption
  • 1 V operation at CL46 matches the board's voltage and timing requirements

Exact-match DDR5 ECC RDIMM

This 32 GB DDR5-5600 registered ECC module is built for the Supermicro X14SDV-32C-SP3F motherboard. It delivers the precise rank, voltage and timing the platform expects so every slot is recognised at full capacity and rated speed.

Registered buffering and 1.10 V operation

The registered architecture offloads the memory controller, allowing full population at the rated 5600 MT/s without added electrical load. ECC corrects single-bit errors on the fly, preventing silent data corruption in continuous server workloads.

Replaces slower or non-ECC DDR5 modules

The upgrade is worth it when your current DIMMs run below 5600 MT/s, lack error correction, or are unbuffered UDIMMs that the board cannot accept. Systems already running registered DDR5-5600 with matching 2Rx8 rank and CL46 timing will see no benefit.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $901.99
Pricier than about 60% of the 21,161 comparable items (median $397.99).
Total capacity 32 GB
Typical for this category: the median of 20,941 items is 32 GB.
Price per GB $28.19 per GB
Pricier than about 79% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-328K1
Total capacity32 GB
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items32 GB DDR5 5600 MHz PC5-44800 2Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

How do I install this 288-pin RDIMM in my Supermicro X14SDV-32C-SP3F and what step is often missed?

Power down, open the chassis, and insert the module into the correct slot following the motherboard's population order — the step most people miss is checking the manual for the exact sequence before seating the DIMM.

What maintenance or replacement will this 32GB DDR5 5600MHz ECC Registered module need over time?

No routine maintenance is required; the module either runs within spec or it fails, and because it uses major OEM Samsung, Micron or Hynix chips it is covered by a lifetime replacement warranty if a defect appears.

What limit shows up first when this CL46 1.1V RDIMM runs sustained workloads?

The registered buffer and ECC logic keep every slot stable at full 5600MHz speed, so the first limit you hit will be the motherboard's maximum supported capacity or thermal envelope, not the memory itself.

More in Model-Specific Memory Upgrades

Similar items