NEMIX RAM 256GB (8x32GB) DDR4 2133 PC4-17000 CL15 1.2V 288-Pin ECC LRDIMM 4Rx4
- 256 GB (8 × 32 GB)
- 288-Pin DDR4 LRDIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 384 GB DDR4 server kit of twelve 32 GB ECC load-reduced DIMMs running at 2133 MHz with CL15 latency
Capacity 384GB (12 x 32GB)
This NEMIX RAM kit delivers 384GB of DDR4 capacity across twelve 32GB LRDIMM modules. It targets administrators scaling virtualisation hosts, database clusters or high-performance computing nodes that require maximum DIMM density per channel.
Each module uses a 288-pin DDR4 LRDIMM interface with 4Rx4 organisation and a 1.2V operating voltage. The load-reduced buffer reduces electrical loading on the memory controller, allowing all twelve slots to be populated without signal degradation. Systems must provide DDR4 LRDIMM-compatible slots and a supporting chipset to recognise the 4Rx4 configuration.
Modules are built with Samsung, Micron or Hynix DRAM and are stress-tested under load before shipping. The kit carries a lifetime replacement warranty backed by US-based IT support staff. No heat spreaders are included, so airflow in the server chassis must be sufficient for bare-module cooling.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NEMIX RAM |
| Product line | NEMIX RAM Original Series Memory |
| Model name | DDR4 ECC LRDIMM Load Reduced Memory |
| Part number | ML17000-344K12 |
| Total capacity | 384 GB (12 × 32 GB) |
| Product type | 288-Pin DDR4 LRDIMM |
| Performance | |
| Rated speed | DDR4 2133 (PC4 17000) |
| Processor | |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Memory | |
| CAS latency | CL15 |
| ECC support | Yes |
| Buffer type | Load Reduced |
| Memory rank | 4Rx4 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.2 V |
Other versions of this model
Each module is a 4Rx4 load-reduced DIMM, so the memory controller sees only one electrical load per rank; the practical limit per channel depends on your server's qualified vendor list and BIOS revision.
At 1.20 V the voltage matches standard DDR4, and the load-reduced buffer reduces electrical loading on the bus, so sustained power and thermals are comparable to regular RDIMMs of the same speed.
The board must support DDR4 2133 LRDIMM modules with ECC and 4Rx4 organisation; consumer or workstation boards that only accept UDIMM or RDIMM will not post with these modules.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?