We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Twelve green DDR4 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 384GB (12x32GB) DDR4 3200 CL22 ECC RDIMM memory upgrade

SKU CH-1C17-CGDKC

A 384 GB DDR4-3200 ECC RDIMM kit of twelve 32 GB modules at CL22, 1.2 V, 288-pin registered memory for Thinkmate servers

  • Total capacity384 GB (12 × 32 GB)
  • Rated speedDDR4 3200 (PC4 25600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL22
  • Buffer typeRegistered
  • Rated voltage1.2 V
  • 384 GB total capacity with twelve 32 GB modules
  • DDR4 3200 speed rated at PC4-25600 bandwidth
  • ECC registered RDIMM for server data integrity
  • CL22 latency at 1.2 V operating voltage
  • 288-pin 2Rx8 design compatible with ThinkMate EDX-QS10-11E3

384GB DDR4 3200 ECC RDIMM kit

This 384GB kit contains twelve 32GB DDR4 3200 ECC registered DIMMs built for Thinkmate servers and workstations. Each module runs at 1.2V with CL22 latency and a 2Rx8 organisation. The registered design adds a buffer that reduces electrical load on the memory controller in multi-DIMM configurations. IT teams upgrading Thinkmate EDX-QS10-11E3 platforms can install the full set to reach the system's supported capacity.

Sustained load behaviour

Modules are stress tested under load before shipping to verify stability during continuous operation. ECC circuitry detects and corrects single-bit errors in real time, preventing data corruption during long compute jobs. Registered buffering keeps signal integrity consistent across all twelve slots even when every channel is populated. The 1.2V operating voltage helps limit thermal output during extended duty cycles.

Pre-installation checks

Verify that the target Thinkmate system accepts 288-pin DDR4 RDIMMs and supports 32GB density per slot across twelve slots. Confirm the BIOS recognises 2Rx8 registered modules at 3200MT/s without down-clocking. Ensure the memory controller can address the full 384GB total capacity with the current firmware revision. Check that no UDIMM or LRDIMM population rules restrict mixing registered modules in the same chassis.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $3,189.99
Pricier than about 73% of the 21,161 comparable items (median $397.99).
Total capacity 384 GB (12 × 32 GB)
Higher than about 85% of the 20,941 comparable items (median 32 GB).
Price per GB $8.31 per GB
Typical for this category: the median of 20,941 items is $8.19 per GB.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineTHINKMATE Server/Workstation Compatible Series Memory
Model nameTHINKMATE DDR4 3200 MHz ECC RDIMM Registered Server Memory
Part numberMR25600-328K12
Total capacity384 GB (12 × 32 GB)
Product type288-Pin DDR4 RDIMM
Performance
Rated speedDDR4 3200 (PC4 25600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL22
ECC supportYes
Buffer typeRegistered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.2 V
Compatibility
Compatible systemsTHINKMATE
In the box
Included items384 GB (12 × 32 GB) DDR4 3200 MHz PC4-25600 2Rx8 1.2 V CL22 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

How much power does the 1.20V DDR4 3200 RDIMM kit draw when the server runs continuously?

Each 32GB module operates at 1.20V; total draw depends on how many of the 12 sticks the platform activates, but voltage stays at 1.20V per DIMM.

What motherboard slots and firmware support are required for the 288-pin ECC RDIMM kit to function?

The kit needs 12 free DDR4 RDIMM slots on a ThinkMate EDX-QS10-11E3 or compatible board with BIOS that enables registered ECC memory.

Will the 3200 CL22 registered ECC modules run at their rated speed alongside slower DDR4 sticks already installed?

The memory controller sets one common frequency; mixing speeds forces all modules to the lowest common rate, so 3200-rated sticks will down-clock to match older DIMMs.

More in Model-Specific Memory Upgrades

Similar items