We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 RDIMM modules without heat spreaders in a kit

NEMIX RAM

NEMIX RAM 384GB (4x96GB) DDR5-6400 CL52 1.1V ECC Registered RDIMM Kit for Supermicro X14DBG-LC+

SKU CH-GZZN-ASYBZ

384 GB of DDR5 server memory in a four-module kit of 96 GB registered ECC RDIMMs rated at 6400 MT/s with CL52 latency and 1.1 V operation, validated for the Supermicro X14DBG-LC+ motherboard

  • Total capacity384 GB (4 × 96 GB)
  • Rated speedDDR5 6400 (PC5 51200)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL52
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 384GB 4X96GB

Show 3 more
  • 384 GB total capacity from four 96 GB modules maximises server memory density
  • DDR5-6400 CL52 at 1.10 V delivers rated throughput for Supermicro X14DBG-LC+
  • Registered ECC RDIMM architecture offloads the controller and corrects single-bit errors automatically
  • 2Rx4 dual-rank organisation enables full population across all four slots at rated speed
  • 288-pin DDR5 form factor matches the motherboard's exact slot and population requirements

384GB DDR5 ECC RDIMM kit for Supermicro X14DBG-LC+

This 384GB kit contains four 96GB DDR5-6400 registered ECC modules built to the exact rank, voltage and timing the Supermicro X14DBG-LC+ memory controller expects. It targets administrators who need maximum supported capacity on this specific platform.

Replaces smaller or mixed-capacity DDR5 RDIMM sets

When a server runs below its supported limit or uses mismatched ranks, the memory controller may downclock or disable slots. Installing this matched 2Rx4 kit at 1.1V restores full-channel bandwidth and allows every slot to operate at the rated 6400 MT/s.

Fits 288-pin RDIMM slots on the validated

Registered buffering offloads the controller so all four modules run fully populated without signal degradation, while on-die ECC corrects single-bit errors before they reach the OS. No heat spreaders are included, so chassis airflow must cool the bare modules directly.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $11,340.99
Pricier than about 89% of the 21,161 comparable items (median $397.99).
Total capacity 384 GB (4 × 96 GB)
Higher than about 85% of the 20,941 comparable items (median 32 GB).
Price per GB $29.53 per GB
Pricier than about 84% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR51200-9624K4
Total capacity384 GB (4 × 96 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 6400 (PC5 51200)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL52
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items384 GB 4 × 96 GB DDR5 6400 MHz PC5-51200 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Will these 288-pin RDIMMs fit the Supermicro X14DBG-LC+ memory slots?

Yes, the kit uses the exact 288-pin Registered DDR5 form factor that the X14DBG-LC+ requires; UDIMM or SODIMM modules will not fit.

What is the correct population order when installing all four 96GB modules?

Fill the slots in the sequence listed in the Supermicro X14DBG-LC+ manual — typically CPU1 channels first, then CPU2 — so the memory controller recognises the full 384GB at DDR5-6400.

Do the modules need any active cooling or thermal-pad replacement over time?

The RDIMMs ship without heat spreaders and run at the standard 1.1V; server chassis airflow is sufficient, so no thermal-pad maintenance is required.

More in Model-Specific Memory Upgrades

Similar items