Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 48GB DDR5 UDIMM running at 5600MHz with CL46 latency, built for SuperMicro C9Z890-MW motherboards
This 48GB DDR5 module is built for the SuperMicro C9Z890-MW motherboard and runs at 5600MT/s with CL46 latency. The 2Rx8 organisation and 1.1V operating voltage match the board's unbuffered non-ECC specification, so the stick drops straight into a compatible DIMM slot without configuration changes.
The module uses major OEM chips from Samsung, Micron or Hynix and has no heat spreader, keeping the profile low for tight workstation chassis. A standard 288-pin UDIMM edge connector ensures firm seating and straightforward insertion, while the unbuffered design means no register delay for typical desktop workloads.
Adding this single 48GB stick expands memory capacity for multi-threaded applications, virtual machines or large datasets that exceed smaller kits. The jump is worthwhile when the platform supports the density and the workload benefits from the extra headroom rather than higher clock speeds.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NEMIX RAM |
| Product line | SuperMicro Server/Workstation Compatible Series Memory |
| Model name | Supermicro DDR5 5600 MHz Non-ECC Unbuffered RAM |
| Part number | MD44800-4828K1 |
| Total capacity | 48 GB |
| Product type | 288-PIN DDR5 UDIMM |
| Performance | |
| Rated speed | DDR5 5600 (PC5 44800) |
| Processor | |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Memory | |
| CAS latency | CL46 |
| ECC support | No |
| Buffer type | Unbuffered |
| Heat spreader | No |
| Memory rank | 2Rx8 |
| Power | |
| Rated voltage | 1.1 V |
| Compatibility | |
| Compatible systems | Supermicro |
| In the box | |
| Included items | 48 GB (1 × 48 GB) DDR5 5600 MHz PC5-44800 2Rx8 1.1 V CL46 288-PIN Non-ECC Unbuffered UDIMM |
The module is rated for DDR5 5600 (PC5-44800) and will operate at that speed if the motherboard supports it.
Yes, the 288-pin DDR5 UDIMM form factor matches the board's DIMM slots and the module has no heat spreader to interfere.
Power off, open the case, align the notch on the 288-pin UDIMM with the slot key, press firmly until both side clips click, then verify the full 48GB appears in BIOS.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?