We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 48GB DDR5 5600MHz CL46 2Rx8 1.1V ECC Registered RDIMM memory upgrade

SKU CH-ECYZ-D1TJV

A 48 GB DDR5 RDIMM running at 5600 MHz with CL46 latency, ECC and registered buffering for Supermicro H13SSH servers

  • Total capacity48 GB
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 48GB DDR5 capacity lets your server handle larger workloads
  • 5600MHz speed transfers data at the rated DDR5-5600 frequency
  • ECC registered design corrects single-bit errors and offloads the memory controller
  • 1V operation matches the motherboard's required voltage for stable operation
  • 2Rx8 288-pin RDIMM form factor fits the Supermicro H13SSH memory slots exactly

Exact-Match DDR5 Upgrade for Supermicro H13SSH

This 48GB DDR5 5600MHz PC5-44800 module is a registered ECC RDIMM built to the precise rank, voltage and timing the Supermicro H13SSH memory controller expects. It is recognised at full capacity and runs at its rated speed without manual tuning.

Sustained Enterprise Stability

Registered architecture offloads the memory controller so every slot runs fully populated at full capacity under continuous load. ECC catches and corrects single-bit errors on the fly, stopping silent data corruption and unplanned reboots before they reach production. The 1.1V operating voltage and CL46 latency remain steady during extended workloads.

Straightforward Slot Installation

The 288-pin RDIMM form factor fits only boards that require registered memory — not UDIMM or SODIMM slots. Builders must consult the system or motherboard manual for supported capacities, approved DIMM population order and installation steps before purchase. Missing the correct population sequence is the most common reason a module is not recognised.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $1,214.99
Pricier than about 62% of the 21,161 comparable items (median $397.99).
Total capacity 48 GB
Higher than about 55% of the 20,941 comparable items (median 32 GB).
Price per GB $25.31 per GB
Pricier than about 70% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-4828K1
Total capacity48 GB
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items48 GB DDR5 5600 MHz PC5-44800 2Rx8 1.1 V 288-PIN ECC RDIMM KIT

Questions about this item

How much power does the 48GB DDR5 5600MHz RDIMM draw at its 1.1V operating voltage?

The module runs at 1.1V, the standard DDR5 voltage, so power draw stays low even when the server runs continuously.

What motherboard slot and memory type are required to install this 288-pin RDIMM?

You need a server board with DDR5 RDIMM slots; the Supermicro H13SSH is the verified platform.

Will this registered ECC DDR5 module work in a board that only supports unbuffered UDIMMs?

No, registered RDIMMs require a memory controller that supports buffered architecture; they will not function in UDIMM-only systems.

More in Model-Specific Memory Upgrades

Similar items