We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 48GB DDR5 5600MHz CL46 2Rx8 ECC Registered RDIMM memory upgrade

SKU CH-RR8H-FFRCM

48 GB DDR5 ECC registered RDIMM running at 5600 MHz with CL46 latency for GIGABYTE MS34-CP0 servers

  • Total capacity48 GB
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 48GB

Show 18 more
  • 48 GB capacity lets servers run larger workloads without swapping
  • DDR5 5600 speed delivers high bandwidth for data-intensive applications
  • ECC registered design detects and corrects single-bit errors automatically
  • 2Rx8 organisation and 1.1 V voltage match the GIGABYTE MS34-CP0 memory controller exactly
  • 288-pin RDIMM form factor fits the required server motherboard slots

Exact-match DDR5-5600 registered ECC module

This 48GB DDR5 5600MHz PC5-44800 RDIMM delivers CL46 latency at 1.1V in a 2Rx8 registered configuration. It is built for servers and workstations that require error-correcting memory and the electrical buffering of registered DIMMs to run fully populated at rated speed. The 288-pin form factor fits only DDR5 RDIMM slots.

Verified fitment for GIGABYTE MS34-CP0

The module is validated for the GIGABYTE MS34-CP0 motherboard, matching the board's required rank, voltage and timing so the firmware recognises the full 48GB capacity at DDR5-5600. Registered architecture offloads the memory controller, allowing every supported slot to operate at full load without signal degradation, while on-die ECC corrects single-bit errors before they reach the operating system.

DDR5 RDIMM population rules apply

Server memory controllers enforce strict population order and maximum capacity per channel that differ by platform; the manual for your specific motherboard defines which slots must be filled first and the total memory limit. Registered DIMMs cannot be mixed with unbuffered UDIMMs or SODIMMs, and the 288-pin keying prevents installation in any other DDR generation slot. Buyers needing higher density per module or non-ECC memory should select a different part.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $1,162.99
Pricier than about 62% of the 21,161 comparable items (median $397.99).
Total capacity 48 GB
Higher than about 55% of the 20,941 comparable items (median 32 GB).
Price per GB $24.23 per GB
Pricier than about 69% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-4828K1
Total capacity48 GB
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsGIGABYTE
In the box
Included items48 GB DDR5 5600 MHz PC5-44800 2Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Will the 2Rx8 rank layout of this 48GB module require any specific population order on the GIGABYTE MS34-CP0 motherboard?

Yes, the motherboard manual defines the approved DIMM population order for registered ECC modules; follow that sequence so the memory controller recognises the full 48GB capacity at DDR5 5600 speed.

What thermal limit appears first when this registered ECC RDIMM runs continuously at 5600MHz?

The module has no heat spreader, so the DRAM junction temperature reaches its throttle point before the 1.10V power envelope becomes the limiting factor.

How much heat does the 1.10V CL46 RDIMM produce inside a fully populated server chassis?

At 1.10V the stick dissipates only its rated DDR5 5600 power budget, and because it is a registered ECC module without a heat spreader, airflow across the bare PCB keeps temperatures in the normal server operating range.

More in Model-Specific Memory Upgrades

Similar items