We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board SODIMM module with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 4GB DDR3 1333 PC3-10600 2Rx8 1.35V 204-Pin SODIMM POSIFLEX KS-7417Z-I memory upgrade

SKU CH-7PVS-KBT5G

A 4 GB DDR3 SODIMM module running at 1333 MHz with 1.35 V low voltage for the POSIFLEX KS-7417Z-I terminal

  • Total capacity4 GB
  • Rated speedDDR3 1333 (PC3 10600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL9
  • Buffer typeUnbuffered
  • Rated voltage1.5 V
  • Designed for POSIFLEX KS-7417Z-I terminal compatibility
  • 4GB DDR3 1333MHz module boosts system responsiveness
  • Low 1.35V operation reduces power consumption
  • 204-pin SODIMM form factor fits POS slots
  • CL9 latency with major OEM chips ensures stability

POSIFLEX KS-7417Z-I compatible DDR3 SODIMM

This 4 GB DDR3 1333 module is built for the POSIFLEX KS-7417Z-I fanless point-of-sale terminal. It uses a 204-pin SODIMM form factor with 2Rx8 organisation and runs at 1.35 V. The memory is non-ECC and unbuffered for standard system compatibility.

Suits POS terminal upgrades only

It fits technicians who need a direct replacement for the KS-7417Z-I platform. Buyers who require ECC error correction, registered modules, higher capacities or a different pin count should look elsewhere. The voltage and timing are fixed for this specific hardware.

204-pin DDR3 1333 SODIMM at 1.35 V

The 204-pin DDR3 1333 interface with 1.35 V operation is the single specification that decides fitment. If the target system demands a different pin layout, voltage or speed grade, this module will not work. Verify the exact slot specification before ordering.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $21.99
Cheaper than about 89% of the 21,161 comparable items (median $397.99).
Total capacity 4 GB
Lower than about 90% of the 20,941 comparable items (median 32 GB).
Price per GB $5.50 per GB
Cheaper than about 70% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product linePOSIFLEX POS Series Point of Sale Kiosk Memory
Model namePOSIFLEX POS DDR3 1333 MHz Non-ECC Unbuffered SODIMM
Part numberMS10600-428K1
Total capacity4 GB
Product type204-Pin DDR3 SODIMM
Performance
Rated speedDDR3 1333 (PC3 10600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL9
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.5 V
Compatibility
Compatible systemsPOSIFLEX POS
In the box
Included items4 GB (1 × 4 GB) DDR3 1333 MHz PC3-10600 2Rx8 1.35 V 204-PIN Non-ECC Unbuffered SODIMM

Questions about this item

Does my POSIFLEX KS-7417Z-I terminal need a free 204-pin SODIMM slot to accept this 4GB DDR3 module?

Yes, the module is a 204-pin DDR3 SODIMM and requires an available SODIMM socket in the POSIFLEX KS-7417Z-I terminal.

Will this 1.35V DDR3 1333 module run stably alongside existing 1.50V DDR3 memory in the same system?

The module operates at 1.35V with a CL9 latency at 1333MHz; the system will typically run all installed DDR3 at the lowest common voltage and speed.

How can I confirm the new memory is recognised at 1333MHz and 4GB capacity after installation?

Check the BIOS memory information or the operating system task manager; both should report 4GB total capacity and a DDR3 1333 (PC3-10600) speed.

More in Model-Specific Memory Upgrades

Similar items