We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 204-pin DDR3 SODIMM module with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 4GB DDR3 1333MHz 1.35V 204-Pin SODIMM POSIFLEX RT-2015 memory upgrade

SKU CH-H365-55Q10

4GB DDR3 1333MHz SODIMM upgrade for POSIFLEX RT-2015 terminal, 1.35V low-voltage operation

  • Total capacity4 GB
  • Rated speedDDR3 1333 (PC3 10600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL9
  • Buffer typeUnbuffered
  • Rated voltage1.5 V
  • 4GB capacity adds multitasking headroom for POS terminals
  • DDR3 1333MHz speed matches system bus for stable throughput
  • 35V low-voltage operation reduces power draw and heat
  • 204-pin SODIMM form factor fits POSIFLEX RT-2015 slot directly
  • CL9 latency with 2Rx8 organisation supports responsive transaction processing

NEMIX RAM 4GB DDR3 SODIMM for POSIFLEX RT-2015

This 4GB DDR3 1333MHz SODIMM is built for the POSIFLEX RT-2015 terminal. It runs at 1.35V with CL9 latency and uses a 204-pin unbuffered non-ECC layout. The module is validated for point-of-sale workloads and installs in a single slot.

Suits POSIFLEX RT-2015 upgrades.

This memory fits the POSIFLEX RT-2015 mid-range terminal only. Buyers who need a different form factor, higher capacity, ECC support or a newer DDR generation should look at other parts. The module is not compatible with desktop DIMM slots or laptop models outside the specified series.

204-pin DDR3 SODIMM interface decides fit

The 204-pin DDR3 SODIMM interface is the single specification that determines compatibility. Only systems accepting DDR3 1333MHz PC3-10600 unbuffered non-ECC modules at 1.35V with 2Rx8 organisation will accept this part. Verify the terminal manual before purchase.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $22.99
Cheaper than about 89% of the 21,161 comparable items (median $397.99).
Total capacity 4 GB
Lower than about 90% of the 20,941 comparable items (median 32 GB).
Price per GB $5.75 per GB
Cheaper than about 68% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product linePOSIFLEX POS Series Point of Sale Kiosk Memory
Model namePOSIFLEX POS DDR3 1333 MHz Non-ECC Unbuffered SODIMM
Part numberMS10600-428K1
Total capacity4 GB
Product type204-Pin DDR3 SODIMM
Performance
Rated speedDDR3 1333 (PC3 10600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL9
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.5 V
Compatibility
Compatible systemsPOSIFLEX POS
In the box
Included items4 GB (1 × 4 GB) DDR3 1333 MHz PC3-10600 2Rx8 1.35 V 204-PIN Non-ECC Unbuffered SODIMM

Questions about this item

What type of memory slot must the POSIFLEX RT-2015 terminal have for this 204-pin SODIMM to fit?

The terminal must provide a DDR3 SODIMM socket that accepts 204-pin modules; this is the physical interface used by the POSIFLEX RT-2015 series.

Will this PC3-10600 CL9 module run stably if the terminal already has slower DDR3 memory installed?

Yes, the module will down-clock to match the slower memory's speed and latency, allowing mixed-speed operation without instability.

How can I verify the module is recognised at the correct 1333 MHz speed after installation?

Enter the system BIOS or use a hardware-information utility; the memory summary should report 1333 MHz (PC3-10600) and CL9 timings for the new module.

More in Model-Specific Memory Upgrades

Similar items