We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 204-pin DDR3 SODIMM module with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 4GB DDR3 1333MHz PC3-10600 1.35V 204-Pin SODIMM memory upgrade

SKU CH-MSPG-HNZRG

4GB DDR3 1333MHz SODIMM module for POSIFLEX XT-5415IR terminals, 1.35V non-ECC unbuffered 204-pin format

  • Total capacity4 GB
  • Rated speedDDR3 1333 (PC3 10600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL9
  • Buffer typeUnbuffered
  • Rated voltage1.5 V
  • Designed for POSIFLEX XT-5415IR POS terminal
  • 4GB DDR3 1333MHz PC3-10600 CL9 module
  • Low-voltage 1.35V operation reduces power draw
  • 204-pin SODIMM fits compatible laptop and POS slots
  • Built with Samsung, Micron or Hynix chipsets

POSIFLEX POS terminal upgrade

This NEMIX RAM module is a 4GB DDR3 SODIMM built for the POSIFLEX XT-5415IR JIVA high-end IR touch fanless POS terminal. It targets technicians who maintain or expand memory in that specific point-of-sale platform.

204-pin DDR3 1333 PC3-10600

The decisive specification is the 204-pin DDR3 1333MHz PC3-10600 interface with 1.35V operating voltage and CL9 latency. Only systems designed for this exact SODIMM standard will recognise and run the module correctly.

Tool-free SODIMM slot access

Installation requires opening the terminal chassis, locating the SODIMM slot and pressing the module in until the side clips latch. The most common issue is inserting the stick at the wrong angle or not seating it fully, which causes the terminal to fail POST.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $21.99
Cheaper than about 89% of the 21,161 comparable items (median $397.99).
Total capacity 4 GB
Lower than about 90% of the 20,941 comparable items (median 32 GB).
Price per GB $5.50 per GB
Cheaper than about 70% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product linePOSIFLEX POS Series Point of Sale Kiosk Memory
Model namePOSIFLEX POS DDR3 1333 MHz Non-ECC Unbuffered SODIMM
Part numberMS10600-428K1
Total capacity4 GB
Product type204-Pin DDR3 SODIMM
Performance
Rated speedDDR3 1333 (PC3 10600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL9
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.5 V
Compatibility
Compatible systemsPOSIFLEX POS
In the box
Included items4 GB (1 × 4 GB) DDR3 1333 MHz PC3-10600 2Rx8 1.35 V 204-PIN Non-ECC Unbuffered SODIMM

Questions about this item

What does the 1333MHz speed mean when the module is installed in the POSIFLEX XT-5415IR terminal?

The module runs at 1333MHz with CL9 latency, delivering PC3-10600 bandwidth for the POS terminal's memory controller.

How does the 204-pin DDR3 SODIMM interface limit the upgrade?

The 204-pin DDR3 SODIMM slot only accepts DDR3 modules; the terminal cannot use other memory generations.

What physical space is needed to install this 204-pin SODIMM in the POSIFLEX XT-5415IR?

The 204-pin SODIMM fits the terminal's internal memory slot; no heat spreader is present so it clears standard latches.

More in Model-Specific Memory Upgrades

Similar items