We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 512GB (16x32GB) DDR5 4800 CL40 ECC RDIMM Cisco UCS C240 M7 memory upgrade

SKU CH-EDMT-REPMQ

512 GB DDR5 ECC registered memory kit with sixteen 32 GB modules at 4800 MT/s CL40 for Cisco UCS C240 M7 rack servers

  • Total capacity512 GB (16 × 32 GB)
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Buffer typeRegistered
  • Rated voltage1.1 V
  • Massive 512 GB capacity from 16 x 32 GB modules
  • DDR5 4800 speed with PC5-38400 bandwidth for data-intensive workloads
  • ECC registered RDIMM architecture protects mission-critical data integrity
  • Low 1.10 V operation reduces power draw in dense server deployments
  • Validated compatibility with Cisco UCS C240 M7 rack servers

Cisco UCS C240 M7 memory kit

This 512 GB kit contains sixteen 32 GB DDR5 4800 registered ECC RDIMMs built for the Cisco UCS C240 M7 rack server. It targets IT teams who need maximum supported capacity for virtualisation, database or analytics workloads on that specific platform. The modules run at 1.1 V with CL40 latency and a 1Rx4 organisation. Buyers who need non-ECC memory or a different form factor cannot use this kit.

Sustained-load behaviour

Each module is stress tested under load before shipment to verify stability during continuous operation. Registered buffering and ECC correction maintain data integrity when all sixteen slots are populated and the server runs at full capacity for extended periods. The 1.1 V operating voltage helps keep power draw predictable across the full configuration. No thermal throttling data or error-rate figures are supplied.

Installation notes

The 288-pin DDR5 RDIMMs insert vertically into the server's memory slots; no heat spreaders are present, so clearance inside the chassis is not increased. Cisco's own service guide should be followed for the correct population order across all sixteen slots. Mixing these modules with different speeds, ranks or vendors may prevent the system from posting or cause intermittent errors.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $12,923.99
Pricier than about 90% of the 21,161 comparable items (median $397.99).
Total capacity 512 GB (16 × 32 GB)
Higher than about 90% of the 20,941 comparable items (median 32 GB).
Price per GB $25.24 per GB
Pricier than about 70% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineCisco Server Compatible Series Memory
Model nameCisco DDR5 4800 MHz ECC RDIMM Registered Server Memory
Part numberMR38400-314K16
Total capacity512 GB (16 × 32 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportYes
Buffer typeRegistered
Heat spreaderNo
Memory rank1Rx4
Power
Rated voltage1.1 V
Compatibility
Compatible systemsCisco
In the box
Included items512 GB (16 × 32 GB) DDR5 4800 MHz PC5-38400 1Rx4 1.1 V CL40 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

What is the operating voltage of these 1.1V DDR5 ECC RDIMMs under continuous server load?

Each module runs at 1.10V, the standard DDR5 voltage, so power draw stays consistent during all-day operation.

Does the Cisco UCS C240 M7 require any specific BIOS setting or firmware revision to recognise this 16-module 512GB kit?

The kit is built to Cisco specifications for the UCS C240 M7; follow the server's own memory-configuration guide for correct population order.

Can I populate the remaining DIMM slots with 288-pin DDR5 RDIMMs of a different capacity or rank?

The server's memory rules allow mixed capacities and ranks if each channel follows Cisco's population sequence; check the platform guide for allowed combinations.

More in Model-Specific Memory Upgrades

Similar items