NEMIX RAM 512GB (8×64GB) DDR4 2400 CL17 ECC LRDIMM 288-pin memory upgrade

Server memory kit for EPYC platforms

This NEMIX RAM kit delivers 512GB of DDR4 capacity across eight 64GB LRDIMM modules. It is built for ASRock Rack ROMED8-2T motherboards running AMD EPYC processors that require registered ECC memory. The load-reduced design helps signal integrity when all DIMM slots are populated. IT teams specify it for virtualisation hosts and database servers that need maximum memory density.

Fits 288-pin DDR4 slots on qualified ASRock server

Each module operates at 1.2V with CL17 timing at the rated 2400 speed. The 4Rx4 organisation allows the memory controller to address the full 512GB without exceeding rank limits on supported platforms. ECC and the load-reduced buffer free the CPU memory controller from driving heavy electrical loads across every channel. No heat spreaders are fitted, so airflow through the server chassis must pass directly over the DRAM packages.

Runs at standard 1.2V DDR4 voltage with no spreaders

Power draw scales with the eight-module population but stays within the DDR4 1.2V specification. Because the modules lack integrated heat spreaders, case fans must supply enough airflow to keep DRAM temperatures in spec under sustained load. The load-reduced buffer reduces electrical loading on the data bus, which can lower overall system power compared to standard registered DIMMs at the same capacity. Acoustic profile follows the server chassis fan curve rather than the memory itself.