We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eight green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 512GB (8x64GB) DDR5 5600 CL46 1.1V ECC RDIMM Supermicro X14SRA-T memory upgrade

SKU CH-FZM7-8H8WB

512 GB DDR5 ECC RDIMM kit with eight 64 GB modules at 5600 MT/s, CL46, 1.1 V, registered for Supermicro X14SRA-T

  • Total capacity512 GB (8 × 64 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 512GB 8X64GB

Show 4 more
  • 512 GB capacity in an 8 × 64 GB kit for maximum Supermicro X14SRA-T memory density
  • DDR5 5600 (PC5-44800) speed with CL46 latency matches the board's rated timing exactly
  • Registered ECC RDIMM architecture offloads the memory controller and corrects single-bit errors on the fly
  • 1 V operating voltage and 2Rx4 rank configuration align with the motherboard's memory-controller requirements
  • 288-pin DDR5 RDIMM form factor is the precise module type the X14SRA-T slots accept

Exact-match DDR5 kit for Supermicro X14SRA-T

This 512 GB kit contains eight 64 GB DDR5 5600 RDIMMs built to the exact rank, voltage and timing the motherboard expects. Registered ECC architecture lets every slot run fully populated at rated speed while correcting single-bit errors on the fly. Modules are 288-pin 2Rx4 devices operating at 1.10 V with CL46 latency.

Sustained-load stability with registered ECC

Registered buffering offloads the memory controller so all eight modules maintain full throughput under continuous server workloads. ECC detection and correction runs constantly, preventing silent data corruption and unplanned reboots during long-running tasks. The 1.10 V operating voltage supports consistent operation across the full population.

Verify DIMM population rules before ordering

Server memory support varies by model and BIOS revision. Consult the Supermicro X14SRA-T manual for approved capacities, slot population order and installation steps. This kit requires 288-pin RDIMM slots and will not fit UDIMM or SODIMM sockets. Ensure your configuration matches the 2Rx4 registered specification.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $14,251.99
Pricier than about 90% of the 21,161 comparable items (median $397.99).
Total capacity 512 GB (8 × 64 GB)
Higher than about 90% of the 20,941 comparable items (median 32 GB).
Price per GB $27.84 per GB
Pricier than about 78% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-924K8
Total capacity512 GB (8 × 64 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items512 GB 8 × 64 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Does the 1.1 V registered ECC kit run hot or draw extra power when the server operates 24/7?

The modules operate at the standard DDR5 server voltage of 1.10 V with no heat spreader, so power draw and thermals stay within normal registered DIMM limits for continuous operation.

What motherboard slot type must my Supermicro X14SRA-T provide for these 288-pin RDIMMs?

The board needs DDR5 288-pin RDIMM slots; the kit is spec-matched to the X14SRA-T memory population rules and will not fit UDIMM or SODIMM sockets.

Can I mix these 64 GB 2Rx4 modules with smaller capacity registered DIMMs already installed?

Yes, provided the motherboard manual approves the mixed population order; the 2Rx4 rank structure and CL46 timing are the exact match the X14SRA-T memory controller expects.

More in Model-Specific Memory Upgrades

Similar items