Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 576 GB registered ECC DDR5 kit in six 96 GB modules running at 6400 MT/s with CL52 latency and 1.1 V for the Supermicro H14DST-F motherboard
This 576GB kit contains six 96GB DDR5 6400 RDIMM modules built to the exact rank, voltage and timing the Supermicro H14DST-F motherboard expects. Registered ECC architecture lets every slot run fully populated at rated speed while correcting single-bit errors on the fly. The 288-pin form factor matches the board's DIMM slots without adapters.
Registered buffering offloads the memory controller so all six modules operate together at 6400 MT/s under continuous workloads. ECC detection and correction runs on every transaction, preventing silent data corruption during long compute runs. The 1.1V operating voltage keeps power draw consistent across the fully populated array.
The PC5-51200 standard defines the maximum transfer rate and timing envelope these modules occupy. CL52 latency is the rated figure at 6400 MT/s; tighter timings are not guaranteed at this speed. Population rules in the motherboard manual determine whether all six slots can run at the rated frequency simultaneously.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NEMIX RAM |
| Product line | NEMIX RAM Original Series Server Memory |
| Model name | DDR5 ECC RDIMM Registered Server Memory |
| Part number | MR51200-9624K6 |
| Total capacity | 576 GB (6 × 96 GB) |
| Product type | 288-Pin DDR5 RDIMM |
| Performance | |
| Rated speed | DDR5 6400 (PC5 51200) |
| Processor | |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Memory | |
| CAS latency | CL52 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.1 V |
| Compatibility | |
| Compatible systems | Supermicro |
| In the box | |
| Included items | 576 GB 6 × 96 GB DDR5 6400 MHz PC5-51200 2Rx4 1.1 V 288-PIN ECC RDIMM KIT |
Each module operates at 1.10V; total power depends on the number of populated slots and the CPU memory controller load, so consult the Supermicro H14DST-F manual for platform-level figures.
The kit is validated for the Supermicro H14DST-F motherboard; you need a compatible CPU that supports DDR5-6400 Registered ECC RDIMMs in a six-DIMM population.
Mixing ranks and capacities is governed by the motherboard’s population rules; check the H14DST-F manual for supported configurations before adding this kit alongside existing modules.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?