We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 576GB (6x96GB) DDR5 6400 CL52 1.1V 2Rx4 ECC Registered RDIMM memory upgrade for Supermicro H13SSL-NT

SKU CH-NRFD-06JPB

A 576 GB DDR5-6400 registered ECC RDIMM kit with six 96 GB modules at 1.1 V CL52, validated for the Supermicro H13SSL-NT motherboard

  • Total capacity576 GB (6 × 96 GB)
  • Rated speedDDR5 6400 (PC5 51200)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL52
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 576 GB total capacity from six 96 GB modules for dense server workloads
  • DDR5 6400 speed with CL52 latency delivers rated throughput
  • 1 V registered ECC RDIMM design reduces electrical load and corrects errors
  • 2Rx4 288-pin form factor matches Supermicro H13SSL-NT slot requirements
  • Lifetime replacement warranty with US-based technical support included

Exact-match 576 GB kit for Supermicro H13SSL-NT

This six-module kit delivers 576 GB of DDR5 6400 memory in a 288-pin registered RDIMM form factor. Each module is a 96 GB 2Rx4 unit operating at 1.1 V with CL52 timing. It is built for the Supermicro H13SSL-NT motherboard and matches the board's required rank, voltage and timing so the controller recognises full capacity at rated speed.

Registered architecture under sustained load

The registered design buffers address and command signals, reducing electrical load on the memory controller when all slots are populated. This allows the full six-module configuration to run continuously at DDR5 6400 without the signal degradation that can appear with unbuffered modules under heavy, sustained throughput. On-die ECC corrects single-bit errors in real time, preventing silent data corruption during long compute runs.

2Rx4 rank organisation decides fit

The dual-rank by four arrangement is the specific density layout the H13SSL-NT memory controller expects for 96 GB modules. If your board's qualified-vendor list calls for a different rank structure, such as single-rank or 2Rx8, this kit will not be recognised at full capacity or at the rated 6400 MT/s. Verify the required rank configuration in your system manual before ordering.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $17,790.99
Pricier than about 91% of the 21,161 comparable items (median $397.99).
Total capacity 576 GB (6 × 96 GB)
Higher than about 90% of the 20,941 comparable items (median 32 GB).
Price per GB $30.89 per GB
Pricier than about 89% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR51200-9624K6
Total capacity576 GB (6 × 96 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 6400 (PC5 51200)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL52
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items576 GB 6 × 96 GB DDR5 6400 MHz PC5-51200 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Questions about this item

How much power does the 1.10V DDR5 6400 kit draw when the server runs continuously?

Each 96GB RDIMM operates at 1.10V; total draw depends on the CPU memory controller and population rules in the Supermicro H13SSL-NT manual.

What must the motherboard provide for these 288-pin Registered ECC modules to function?

The board must support DDR5 RDIMM form factor, Registered architecture, ECC, 2Rx4 rank structure and the exact population order for six modules.

Will the 2Rx4 Registered ECC layout work in the remaining slots if I keep older DDR5 RDIMMs installed?

Mixed ranks or voltages can prevent full-speed operation; the H13SSL-NT manual specifies which slot combinations are validated.

More in Model-Specific Memory Upgrades

Similar items