Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
64 GB DDR5 registered ECC RDIMM running at 4800 MT/s with CL40 latency for Supermicro servers
This 64GB registered DDR5 module operates at 4800MT/s with CL40 latency and 1.10V voltage. It uses a 2Rx4 rank configuration built with major OEM chips and carries ECC error correction. The 288-pin RDIMM form factor fits compatible Supermicro server and workstation motherboards requiring registered memory.
This module targets administrators expanding memory in qualified Supermicro servers or workstations that support DDR5 4800 registered ECC RDIMMs. It is not for desktop PCs, laptops or consumer motherboards that accept only unbuffered non-ECC DIMMs. Buyers needing unregistered memory or different speeds should verify their platform documentation before purchasing.
The single specification that determines fit is the registered ECC RDIMM design combined with DDR5 4800 signalling. Only systems explicitly qualified for this module type and speed will recognise and stabilise the 64GB capacity. Confirm the motherboard memory qualification list matches this exact configuration to avoid boot or stability issues.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NEMIX RAM |
| Product line | SuperMicro Server/Workstation Compatible Series Memory |
| Model name | SuperMicro DDR5 5600 MHz ECC RDIMM Registered Server Memory |
| Part number | MR44800-924K1 |
| Total capacity | 64 GB |
| Product type | 288-Pin DDR5 RDIMM |
| Performance | |
| Rated speed | DDR5 4800 (PC5 38400) |
| Processor | |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Memory | |
| CAS latency | CL40 |
| ECC support | Yes |
| Buffer type | Registered |
| Heat spreader | No |
| Memory rank | 2Rx4 |
| Power | |
| Rated voltage | 1.1 V |
| Compatibility | |
| Compatible systems | Supermicro |
| In the box | |
| Included items | 64 GB (1 × 64 GB) DDR5 4800 MHz PC5-38400 2Rx4 1.1 V CL46 288-PIN ECC RDIMM Registered Server Memory |
Yes, the module uses the standard 288-pin DDR5 RDIMM form factor designed for Supermicro server motherboards that support registered ECC memory.
Align the notch with the slot key, press straight down until both side clips click shut, then verify the system BIOS reports 64 GB at 4800 MT/s with ECC active.
Replace only if the system logs report uncorrectable ECC errors or the module fails POST; otherwise it is rated for continuous operation at 1.1 V.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?