We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green SODIMM sticks side by side, 260-pin DDR4 3200 CL22 64GB kit

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR4 3200 CL22 SODIMM POSIFLEX ZT-3715E memory upgrade

SKU CH-983H-N8Q8R

DDR4 3200 SODIMM kit adds 64 GB across two 32 GB modules for POSIFLEX ZT-3715E terminals

  • Total capacity64 GB (2 × 32 GB)
  • Rated speedDDR4 3200 (PC4 25600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL22
  • Buffer typeUnbuffered
  • Rated voltage1.2 V
  • 64 GB kit doubles terminal memory capacity
  • DDR4 3200 speed matches POSIFLEX ZT-3715E specifications
  • CL22 latency and 1.2 V voltage ensure stable operation
  • 2Rx8 dual-rank Samsung Micron Hynix chips deliver enterprise reliability
  • 260-pin SODIMM form factor installs in minutes without tools

POS Terminal Memory Kit

This NEMIX RAM kit provides 64GB of DDR4 3200 memory in two 32GB SODIMM modules. It is built for the POSIFLEX ZT-3715E Haydn ZT Series point-of-sale terminal. The modules run at 1.2V with CL22 latency and use a 260-pin unbuffered non-ECC design. Major OEM chips from Samsung, Micron or Hynix are used throughout.

Compatibility and Limits

The kit suits technicians upgrading a POSIFLEX ZT-3715E terminal to its maximum supported capacity. It will not fit desktops or laptops that require DIMM form factors or registered ECC modules. Buyers needing ECC error correction or a different pin layout should look at other memory lines. The 2Rx8 organisation is fixed by the module design.

Deciding Specification

The 260-pin DDR4 SODIMM form factor is the single detail that decides fit. Only systems wired for 260-pin DDR4 SO-DIMM sockets can accept these modules. Speed, voltage and latency are secondary to the physical and electrical interface. Verify the terminal’s service manual before ordering.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $327.99
Typical for this category: the median of 21,161 items is $397.99.
Total capacity 64 GB (2 × 32 GB)
Higher than about 60% of the 20,941 comparable items (median 32 GB).
Price per GB $5.12 per GB
Cheaper than about 75% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product linePOSIFLEX POS Series Point of Sale Kiosk Memory
Model namePOSIFLEX POS DDR4 3200 MHz Non-ECC Unbuffered SODIMM
Part numberMS25600-328K2
Total capacity64 GB (2 × 32 GB)
Product type260-Pin DDR4 SODIMM
Performance
Rated speedDDR4 3200 (PC4 25600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL22
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.2 V
Compatibility
Compatible systemsPOSIFLEX POS
In the box
Included items64 GB (2 × 32 GB) DDR4 3200 MHz PC4-25600 2Rx8 1.2 V CL22 260-PIN Non-ECC Unbuffered SODIMM KIT

Questions about this item

What does 3200 MHz actually deliver inside a POSIFLEX ZT-3715E terminal?

The kit runs at DDR4 3200 (PC4-25600) with CL22 latency, providing the maximum bandwidth the terminal's memory controller supports for this capacity.

What does the PC4-25600 rating mean for everyday use?

PC4-25600 is the peak transfer rate of DDR4 3200; the terminal will operate at this speed provided the BIOS is set to the default XMP or JEDEC profile.

Will the 260-pin SODIMM modules fit the ZT-3715E motherboard?

Yes, the 260-pin DDR4 SODIMM form factor matches the two SO-DIMM slots in the POSIFLEX ZT-3715E for a direct installation.

More in Model-Specific Memory Upgrades

Similar items