Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
64 GB kit of two 32 GB DDR5 UDIMMs at 4800 MHz CL40 1.1 V, validated for the Gigabyte B760I Aorus Pro Mini-ITX board
This 64 GB kit contains two 32 GB DDR5 UDIMM modules built for the GIGABYTE B760I AORUS PRO Mini-ITX motherboard. It targets builders upgrading that specific board who need the maximum dual-channel capacity without ECC or registered buffering. The kit is not suited for systems that require registered DIMMs, error-correcting memory, or speeds beyond the rated JEDEC baseline. Buyers needing more than 64 GB or a different form factor should look elsewhere.
Operating at the standard 1.1 V DDR5 voltage, the modules draw minimal power and run without a heat spreader. In typical desktop workloads the bare PCB stays cool enough that active airflow from the case fans is sufficient. The low voltage and unbuffered design keep idle and light-load power draw well within the motherboard’s standard DIMM slot limits. No extra cooling hardware is required for everyday operation.
During prolonged heavy memory traffic the 2Rx8 organisation and CL40 latency deliver steady JEDEC 4800 MT/s throughput without overclocking headroom. The absence of a heat spreader means the DRAM relies on case airflow to dissipate heat during extended runs. Temperatures remain stable as long as the chassis provides reasonable air movement; enclosed builds with restricted flow may see higher module temperatures. The kit maintains its rated timings continuously rather than throttling.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NEMIX RAM |
| Product line | NEMIX RAM Original Series Memory |
| Model name | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part number | MD38400-328K2 |
| Total capacity | 64 GB (2 × 32 GB) |
| Product type | 288-Pin DDR5 UDIMM |
| Performance | |
| Rated speed | DDR5 4800 (PC5 38400) |
| Processor | |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Memory | |
| CAS latency | CL40 |
| ECC support | No |
| Buffer type | Unbuffered |
| Heat spreader | No |
| Memory rank | 2Rx8 |
| Power | |
| Rated voltage | 1.1 V |
| Compatibility | |
| Compatible systems | GIGABYTE |
| In the box | |
| Included items | 64 GB (2 × 32 GB) DDR5 4800 MHz PC5-38400 2Rx8 1.1 V 288-PIN Non-ECC UDIMM KIT |
Align the notch on each 32GB module with the slot key, press firmly until both side clips click, then verify in BIOS that both sticks show at 4800 MT/s; the step often missed is seating the second module fully in the Mini-ITX board's tight layout.
No scheduled maintenance is required; if a module fails, replace the faulty 32GB stick with an identical DDR5 4800 CL40 1.10V 2Rx8 UDIMM to keep dual-channel operation intact.
The CAS latency of 40 cycles at 4800 MT/s sets the primary latency floor; thermal throttling is unlikely because the modules run at standard 1.10V without a heat spreader.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?