We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 UDIMM sticks, no heat spreaders, gold contacts visible

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR5 5600 CL46 2Rx8 1.1V 288-pin UDIMM Dell Pro Max Micro memory upgrade

SKU CH-AGWP-TJAGH

64 GB dual-channel DDR5 kit (2 × 32 GB) at 5600 MT/s CL46, 1.1 V unbuffered UDIMM built for the Dell Pro Max Micro desktop

  • Total capacity64 GB (2 × 32 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Buffer typeUnbuffered
  • Rated voltage1.1 V
  • 64 GB total capacity with two 32 GB modules
  • DDR5 5600 speed rated at PC5-44800 bandwidth
  • Low 1.1 V operating voltage for efficient power use
  • CL46 latency timing for responsive data access
  • 288-pin UDIMM form factor built for Dell Pro Max Micro

Dell Pro Max Micro upgrade

This 64GB kit delivers two 32GB DDR5 modules rated at 5600 MT/s with CL46 latency. Each stick runs at 1.1V on a 288-pin UDIMM form factor and uses a 2Rx8 organisation without ECC or a heat spreader. The memory is validated for the Dell Pro Max Micro desktop.

Suits Dell Pro Max Micro owners

Buyers who need a matched pair of 32GB DDR5 modules for that specific system will find the correct speed, voltage and pin-out here. Builders targeting a different motherboard, a laptop SO-DIMM slot, or a platform that requires registered or ECC memory should look elsewhere.

Fits two UDIMM slots on the Dell board

The kit occupies both DIMM sockets on the Pro Max Micro, providing the full 64GB capacity in a dual-channel configuration. No additional cooling hardware is required because the modules ship without spreaders, and the 1.1V operation keeps power draw within the platform’s standard memory budget.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $933.99
Pricier than about 60% of the 21,161 comparable items (median $397.99).
Total capacity 64 GB (2 × 32 GB)
Higher than about 60% of the 20,941 comparable items (median 32 GB).
Price per GB $14.59 per GB
Pricier than about 61% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR5 Non-ECC Unbuffered UDIMM Memory
Part numberMD44800-328K2
Total capacity64 GB (2 × 32 GB)
Product type288-Pin DDR5 UDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.1 V
Compatibility
Compatible systemsDell
In the box
Included items64 GB (2 × 32 GB) DDR5 5600 MHz PC5-44800 2Rx8 1.1 V 288-PIN Non-ECC UDIMM KIT

Questions about this item

Does my Dell Pro Max Micro desktop have the two DDR5 UDIMM slots this 64 GB kit requires?

The kit is built for the Dell Pro Max Micro desktop and uses 288-pin DDR5 UDIMM modules; verify the system has two free DDR5 slots before installing.

If I leave the original memory installed, will the system still run at DDR5 5600 CL46?

Mixing modules forces the memory controller to run all sticks at the lowest common speed and latency; for full 5600 MT/s CL46 performance, replace the original memory with this 2x32 GB kit.

How can I confirm the kit is operating at DDR5 5600 CL46 after installation?

Check the memory speed and CAS latency in BIOS or a tool such as CPU-Z; both should report 5600 MT/s and CL46 when the kit is running as intended.

More in Model-Specific Memory Upgrades

Similar items