We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green 288-pin DDR5 RDIMM modules in a 64GB kit

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR5 5600 CL46 2Rx8 1.1V ECC Registered RDIMM for Supermicro X14SRA-F

SKU CH-37DD-Q2DK9

A 64 GB (2 × 32 GB) DDR5 5600 CL46 2Rx8 1.1 V ECC registered RDIMM kit validated for the Supermicro X14SRA-F motherboard

  • Total capacity64 GB (2 × 32 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 64GB 2X32GB

Show 4 more
  • 64 GB kit lets you fully populate two slots with matched 32 GB modules
  • DDR5 5600 speed and CL46 latency deliver the rated throughput your memory controller expects
  • Registered ECC architecture offloads the controller and corrects single-bit errors on the fly
  • 1 V operation meets the exact voltage the platform requires for stable operation
  • 288-pin RDIMM form factor matches the Supermicro X14SRA-F slot specification exactly

Exact-match DDR5 ECC RDIMM kit for Supermicro

This 64 GB kit contains two 32 GB DDR5-5600 modules built to the PC5-44800 standard. Each stick is a 288-pin Registered DIMM with 2Rx8 organisation, CL46 latency and 1.10 V operation. The combination of ECC and registered buffering delivers the error correction and signal integrity required by the Supermicro X14SRA-F platform.

Verify motherboard population rules

Consult the Supermicro X14SRA-F manual for approved DIMM capacities, population order and maximum supported memory per channel. The board requires 288-pin RDIMMs; UDIMMs or SODIMMs will not fit or function. Confirm that your firmware revision supports the full 64 GB kit at the rated DDR5-5600 speed.

Replaces non-ECC or lower-capacity DDR5 RDIMMs

The upgrade is worthwhile when your workloads demand registered ECC memory for data integrity or when the current configuration leaves slots empty and limits total capacity. If the system already runs a validated 64 GB DDR5-5600 RDIMM population, the kit provides no additional benefit.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $1,882.99
Pricier than about 67% of the 21,161 comparable items (median $397.99).
Total capacity 64 GB (2 × 32 GB)
Higher than about 60% of the 20,941 comparable items (median 32 GB).
Price per GB $29.42 per GB
Pricier than about 83% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-328K2
Total capacity64 GB (2 × 32 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items64 GB 2 × 32 GB DDR5 5600 MHz PC5-44800 2Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Does the kit come with both 32 GB modules or do I need to order a second stick separately?

The kit contains two 32 GB DDR5 RDIMMs for a total of 64 GB, so nothing else is required.

Should I pick the 2Rx8 CL46 version or is there another rank or latency option for this motherboard?

This part is a 2Rx8 CL46 module at 1.10 V; the Supermicro X14SRA-F memory list calls for exactly that rank and timing.

Will the rated 5600 MT/s speed actually run on the X14SRA-F or does it drop to a lower JEDEC speed?

The modules are specified at DDR5 5600 (PC5-44800) and the board's qualified-vendor list includes this exact speed, so they operate at the rated 5600 MT/s.

More in Model-Specific Memory Upgrades

Similar items