We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green 288-pin DDR5 UDIMM sticks, no heat spreader

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR5 5600 CL46 2Rx8 1.1V UDIMM Dell Pro Max Tower T2

SKU CH-7B91-TM0P6

64GB dual-channel DDR5 kit with two 32GB UDIMMs at 5600MHz CL46, 1.1V, validated for Dell Pro Max Tower T2

  • Total capacity64 GB (2 × 32 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Buffer typeUnbuffered
  • Rated voltage1.1 V
  • 64 GB total capacity from two 32 GB modules
  • DDR5 5600 speed rated at PC5-44800 for fast data throughput
  • Low 1.1 V operating voltage reduces power draw and heat
  • CL46 CAS latency supports responsive system performance
  • 288-pin UDIMM form factor fits Dell Pro Max Tower T2

Dell Pro Max Tower T2 Memory Kit

This 64 GB kit uses two 32 GB DDR5 modules built for the Dell Pro Max Tower T2 desktop. It targets owners who want the full supported capacity in a single matched pair without mixing older sticks.

DDR5 5600 CL46 2Rx8 1.1 V UDIMM

The kit runs at 5600 MT/s with CL46 latency at 1.1 V using dual-rank 2Rx8 chips on 288-pin unbuffered non-ECC boards. That exact speed, timing and voltage combination is the deciding factor for stable operation in the qualified platform.

Dual-slot 288-pin DDR5 upgrade

Two UDIMM slots are filled, leaving any additional slots free for future expansion if the board provides them. The modules have no heat spreader, so they fit under standard CPU coolers and keep the memory channels free of extra height constraints.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $940.99
Pricier than about 60% of the 21,161 comparable items (median $397.99).
Total capacity 64 GB (2 × 32 GB)
Higher than about 60% of the 20,941 comparable items (median 32 GB).
Price per GB $14.70 per GB
Pricier than about 61% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR5 Non-ECC Unbuffered UDIMM Memory
Part numberMD44800-328K2
Total capacity64 GB (2 × 32 GB)
Product type288-Pin DDR5 UDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.1 V
Compatibility
Compatible systemsDell
In the box
Included items64 GB (2 × 32 GB) DDR5 5600 MHz PC5-44800 2Rx8 1.1 V 288-PIN Non-ECC UDIMM KIT

Questions about this item

Will the CL46 latency slow down everyday tasks on the Dell Pro Max Tower T2?

CL46 is the CAS latency rating for these DDR5 5600 modules; the system will run at the rated timings once installed.

Does the PC5-44800 rating limit the speed on the Dell Pro Max Tower T2?

PC5-44800 is the peak transfer rate for DDR5 5600; the memory will operate at that bandwidth on the supported platform.

Will the 288-pin UDIMM modules fit the Dell Pro Max Tower T2 motherboard?

Yes, the kit uses standard 288-pin DDR5 UDIMM form factor designed for the Dell Pro Max Tower T2.

More in Model-Specific Memory Upgrades

Similar items