Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
64 GB dual-channel DDR5 kit running at 5600 MT/s with CL46 latency for Supermicro BH4SR2-25G boards
This 64 GB kit contains two 32 GB DDR5 UDIMMs built for the Supermicro BH4SR2-25G motherboard. It is intended for desktop or workstation users who need a matched pair of unbuffered non-ECC modules that the board vendor has qualified. Builders using a different platform should verify compatibility before ordering.
The modules run at DDR5-5600 (PC5-44800) with a CAS latency of 46 and a nominal voltage of 1.1 V. This speed and timing combination is the single specification that determines whether the memory will operate at its rated frequency on the target motherboard without manual tuning.
The dual-rank 2Rx8 organisation and absence of a heat spreader mean thermal headroom depends on case airflow during prolonged workloads. Under continuous read/write cycles the kit maintains its rated timings at 1.1 V, provided the chassis delivers adequate cooling to the bare modules.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NEMIX RAM |
| Product line | NEMIX RAM Original Series Memory |
| Model name | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part number | MD44800-328K2 |
| Total capacity | 64 GB (2 × 32 GB) |
| Product type | 288-Pin DDR5 UDIMM |
| Performance | |
| Rated speed | DDR5 5600 (PC5 44800) |
| Processor | |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Memory | |
| CAS latency | CL46 |
| ECC support | No |
| Buffer type | Unbuffered |
| Heat spreader | No |
| Memory rank | 2Rx8 |
| Power | |
| Rated voltage | 1.1 V |
| Compatibility | |
| Compatible systems | Supermicro |
| In the box | |
| Included items | 64 GB (2 × 32 GB) DDR5 5600 MHz PC5-44800 2Rx8 1.1 V 288-PIN Non-ECC UDIMM KIT |
The kit runs at 5600 MT/s, delivering up to 44800 MB/s peak bandwidth per module; actual throughput depends on the motherboard's memory controller and the number of populated slots.
The 288-pin DDR5 UDIMM form factor is keyed only for DDR5 slots and supports the kit's 5600 MT/s rating; the board's chipset and BIOS determine the maximum usable frequency and total capacity.
Each module is a standard-height 288-pin UDIMM with no heat spreader, so it fits the board's DDR5 slots as long as the CPU cooler or chassis does not overhang the memory sockets.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?