We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR5 5600 ECC Unbuffered UDIMM CL46 1.1V 288-Pin Kit for SuperMicro BH4SR2-25G BH4SRG

SKU CH-WTPR-S4NYF

A 64 GB DDR5 ECC unbuffered kit of two 32 GB modules running at 5600 MT/s with CL46 latency and 1.1 V for SuperMicro BH4SR2-25G and BH4SRG motherboards

  • Total capacity64 GB (2 × 32 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Buffer typeUnbuffered
  • Rated voltage1.1 V
  • ECC protection guards data integrity for critical workloads
  • 5600 MHz DDR5 speed accelerates memory-intensive tasks
  • 64 GB kit doubles capacity with two 32 GB modules
  • Low 1.1 V operation reduces power draw and heat
  • Validated for SuperMicro BH4SR2-25G and BH4SRG motherboards

Capacity and Compatibility

This 64GB kit delivers two 32GB DDR5 5600 ECC unbuffered UDIMMs built for SuperMicro BH4SR2-25G and BH4SRG motherboards. The modules run at 1.1V with CL46 latency and use a 2Rx8 organisation on a standard 288-pin interface. They provide error-correcting memory for workloads that require data integrity.

Suitability and Limits

Builders upgrading or repairing the listed SuperMicro platforms can install this kit directly. Systems that need registered DIMMs, non-ECC memory, or a different DDR generation will not accept these modules. The 32GB per module density also means boards limited to lower single-DIMM capacities cannot use the kit.

Deciding Specification

The key figure is the DDR5 5600 (PC5-44800) ECC unbuffered UDIMM standard at 1.1V with CL46 timing. Match this exact specification against the motherboard memory QVL before purchase to confirm compatibility.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $1,239.99
Pricier than about 62% of the 21,161 comparable items (median $397.99).
Total capacity 64 GB (2 × 32 GB)
Higher than about 60% of the 20,941 comparable items (median 32 GB).
Price per GB $19.37 per GB
Pricier than about 65% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR5 ECC Unbuffered UDIMM Memory
Part numberME44800-328K2
Total capacity64 GB (2 × 32 GB)
Product type288-Pin DDR5 ECC UDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeUnbuffered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items64 GB (2 × 32 GB) DDR5 5600 MHz PC5-44800 2Rx8 1.1 V 288-PIN ECC UDIMM KIT

Questions about this item

Does my SuperMicro BH4SR2-25G or BH4SRG motherboard need to support DDR5 5600 ECC unbuffered UDIMMs for this kit to work?

Yes, the motherboard must accept DDR5 5600 ECC unbuffered UDIMMs at 1.1V with 288-pin layout; the kit is validated for those exact SuperMicro models.

Will the CL46 2Rx8 modules run at their rated 5600 speed if the board only officially supports a lower DDR5 data rate?

The modules will operate at the highest speed the motherboard allows; if the board caps DDR5 below 5600, they will downclock automatically while keeping ECC and 1.1V operation.

How can I confirm the kit is running as intended after installation?

Check BIOS or OS memory reporting for 64 GB total, DDR5 5600 (PC5-44800), CL46 timings, ECC active, and 1.1V voltage on both 2Rx8 modules.

More in Model-Specific Memory Upgrades

Similar items