We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR5 6400 ECC RDIMM CL52 1.1V 2Rx4 Supermicro X14SRG-TF

SKU CH-QEYZ-58QP1

64 GB kit of two 32 GB DDR5 6400 ECC registered DIMMs at CL52 and 1.1 V, validated for the Supermicro X14SRG-TF motherboard

  • Total capacity64 GB (2 × 32 GB)
  • Rated speedDDR5 6400 (PC5 51200)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL52
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 64 GB kit delivers full capacity at rated speed because the 2Rx4 registered ECC modules match the memory controller exactly
  • DDR5 6400 CL52 at 1.1 V provides enterprise stability with on-the-fly error correction for uninterrupted operation
  • 288-pin RDIMM form factor fits the Supermicro X14SRG-TF motherboard precisely without UDIMM or SODIMM mismatch
  • Registered architecture offloads the controller so every slot runs fully populated at full capacity
  • Lifetime replacement warranty and US-based technical support back the upgrade for long-term reliability

Server-grade DDR5 ECC RDIMM kit

This 64GB kit delivers two 32GB registered DDR5 modules rated at 6400 MT/s with CL52 latency and 1.1V operation. The 2Rx4 organisation and ECC support match the Supermicro X14SRG-TF memory controller requirements for full-capacity recognition at rated speed.

Replaces slower or smaller DDR5 RDIMMs

Upgrading from lower-frequency DDR5 or smaller-capacity registered modules is worthwhile when workloads demand the full 64GB at 6400 MT/s with error correction. The exact rank, voltage and timing spec avoids down-clocking or population-rule conflicts on the target board.

Handles memory-intensive server workloads

The registered architecture offloads the controller so every slot runs fully populated at 6400 MT/s, while ECC corrects single-bit errors before they reach production. Capacity is fixed at 64GB; systems needing more memory must use a motherboard that supports larger DIMM counts or higher-density modules.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $2,606.99
Pricier than about 71% of the 21,161 comparable items (median $397.99).
Total capacity 64 GB (2 × 32 GB)
Higher than about 60% of the 20,941 comparable items (median 32 GB).
Price per GB $40.73 per GB
Pricier than about 90% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR51200-324K2
Total capacity64 GB (2 × 32 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 6400 (PC5 51200)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL52
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items64 GB 2 × 32 GB DDR5 6400 MHz PC5-51200 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Will the 288-pin RDIMM modules fit the Supermicro X14SRG-TF motherboard slots?

Yes, the kit uses the 288-pin Registered DDR5 RDIMM form factor that the X14SRG-TF requires, not UDIMM or SODIMM.

What is the correct order to populate the two 32 GB sticks on this board?

Consult the motherboard manual for the approved DIMM population sequence; the kit must be installed in the slots specified for a 2Rx4 Registered ECC configuration.

Does the lack of a heat spreader affect long-term reliability under full load?

The modules are built with major OEM Samsung, Micron or Hynix chips rated for 1.10 V operation at DDR5-6400 CL52, and the Registered ECC design maintains stability without a spreader.

More in Model-Specific Memory Upgrades

Similar items