We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR4 UDIMM sticks in a kit

NEMIX RAM

NEMIX RAM 64GB 4x16GB DDR4 2400 CL17 1.2V 288-Pin Non-ECC UDIMM desktop RAM

SKU CH-3MCE-NRY97

Four 16 GB DDR4 modules totalling 64 GB run at 2400 MT/s with CL17 latency and 1.2 V on standard 288-pin UDIMM slots

  • Total capacity64 GB (4 × 16 GB)
  • Rated speedDDR4 2400 (PC4 19200)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL17
  • Rated voltage1.2 V
  • Buffer typeUnbuffered

Capacity 64GB (4 x 16GB)

  • 64 GB total capacity from four 16 GB modules
  • DDR4 2400 speed rated at PC4 19200 bandwidth
  • CL17 latency at standard 1.20 V operation
  • 288 pin unbuffered non ECC UDIMM form factor
  • Built with major OEM Samsung Micron Hynix chipsets

64 GB DDR4 Kit for Desktop Systems

This kit delivers 64 GB of DDR4 memory across four 16 GB unbuffered UDIMM modules. It runs at 2400 MT/s with a CAS latency of CL17 and operates at the standard 1.20 V. The modules use major OEM chips from Samsung, Micron or Hynix and carry no heat spreaders or lighting.

Suits Standard DDR4 Platforms Seeking Capacity

The 288-pin non-ECC design fits mainstream desktop motherboards that support DDR4 2400 PC4-19200 memory. Builders needing ECC error correction, registered modules or higher frequencies should look at different product lines. The quad-channel population also requires a board with four slots.

Steady Throughput Under Continuous Load

Each module is stress-tested under sustained workloads to verify stability before shipping. Without heat spreaders, thermal performance depends on case airflow, but the low 1.20 V voltage helps keep temperatures manageable during extended compute sessions. The unbuffered topology adds minimal latency for consistent data flow.

How it compares

Measured against everything we stock in Desktop RAM, at today’s prices. Recalculated every night.

Price $410.99
Pricier than about 81% of the 3,647 comparable items (median $90.99).
Total capacity 64 GB (4 × 16 GB)
Higher than about 90% of the 3,251 comparable items (median 16 GB).
Price per GB $6.42 per GB
Typical for this category: the median of 3,251 items is $6.75 per GB.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM DDR4 Orignial Desktop PC 288-Pin Non-ECC Unbuffered UDIMM Memory
Model nameOriginal Series DDR4 Desktop PC Memory Solutions
Part numberMD19200-628K4
Total capacity64 GB (4 × 16 GB)
Product type288-Pin DDR4 UDIMM
Performance
Rated speedDDR4 2400 (PC4 19200)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL17
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Power
Rated voltage1.2 V
More details
LED lightingNone

Other versions of this model

5 more in the same range

Questions about this item

Will this kit work in a motherboard that only supports DDR4 2400 speeds?

Yes, the modules run at DDR4 2400 (PC4-19200) with CL17 latency at 1.20 V, matching that specification exactly.

Do I need to enable any special profile in the BIOS to reach the rated speed?

The kit operates at standard JEDEC DDR4 2400 settings, so it will run at the rated speed without enabling XMP or manual tuning.

Can I add this 64 GB kit alongside my existing 16 GB DDR4 sticks?

Mixing kits is possible but not guaranteed; for best stability use identical modules, so a full 4 x 16 GB replacement is recommended.

More in Desktop RAM

Similar items