We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR4 UDIMM modules with black chips, no heat spreader

NEMIX RAM

NEMIX RAM MD19200-628K2 32GB (2x16GB) DDR4 2400 CL17 desktop RAM

SKU CH-6AA2-VM0J9

A 32 GB dual-channel kit of 2400 MHz DDR4 UDIMM memory in two 16 GB modules with CL17 latency and 1.2 V operation

  • Total capacity32 GB (2 × 16 GB)
  • Rated speedDDR4 2400 (PC4 19200)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL17
  • Rated voltage1.2 V
  • Buffer typeUnbuffered

Capacity 32GB (2 x 16GB)

  • 32 GB total capacity from two 16 GB modules
  • DDR4 2400 speed rated at PC4-19200
  • CL17 CAS latency for responsive timing
  • 2 V operation reduces power draw
  • 288-pin unbuffered non-ECC UDIMM fits standard desktop boards

Kit configuration and target use

This NEMIX RAM kit supplies 32 GB of DDR4 memory in two 16 GB modules. The dual-channel pair is built for standard desktop boards that accept 288-pin UDIMM slots and do not require ECC or registered DIMMs. It suits office workstations, home PCs and light content-creation rigs that need reliable capacity without overclocking headroom.

Behaviour under sustained load

Running at 2400 MT/s with CL17 timings and a fixed 1.20 V supply, the modules deliver steady throughput during long compile jobs, virtual-machine workloads or extended browsing sessions. The unbuffered design keeps latency predictable, while the 2Rx8 organisation helps maintain bandwidth when all ranks are active for hours at a time.

Compatibility checks before ordering

Verify that your motherboard supports DDR4 2400 non-ECC UDIMM memory and has two free 288-pin slots. Confirm the board can operate at 1.20 V without manual voltage adjustment. Ensure the CPU memory controller is rated for at least 2400 MT/s so the kit runs at its labelled speed without down-clocking.

How it compares

Measured against everything we stock in Desktop RAM, at today’s prices. Recalculated every night.

Price $208.99
Pricier than about 69% of the 3,647 comparable items (median $90.99).
Total capacity 32 GB (2 × 16 GB)
Higher than about 70% of the 3,251 comparable items (median 16 GB).
Price per GB $6.53 per GB
Typical for this category: the median of 3,251 items is $6.75 per GB.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM DDR4 Orignial Desktop PC 288-Pin Non-ECC Unbuffered UDIMM Memory
Model nameOriginal Series DDR4 Desktop PC Memory Solutions
Part numberMD19200-628K2
Total capacity32 GB (2 × 16 GB)
Product type288-Pin DDR4 UDIMM
Performance
Rated speedDDR4 2400 (PC4 19200)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL17
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Power
Rated voltage1.2 V
More details
LED lightingNone

Other versions of this model

5 more in the same range

Questions about this item

Will this kit fit a standard desktop motherboard that takes 288-pin DDR4 UDIMM modules?

Yes, the kit uses 288-pin DDR4 UDIMM form factor at 1.20 V, which matches standard desktop DIMM slots.

My board only runs memory at 2400 MT/s — will these modules work without manual BIOS changes?

The modules are rated for DDR4 2400 (PC4-19200) at CL17, so they will operate at that speed on a board limited to 2400 MT/s.

Does the 2Rx8 organisation on each 16 GB module affect compatibility with consumer chipsets?

2Rx8 is a common density for 16 GB DDR4 UDIMMs and is supported by most consumer desktop chipsets that accept 32 GB kits.

More in Desktop RAM

Similar items