Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
64 GB kit of four 16 GB DDR4 2666 ECC unbuffered SODIMM modules at 1.2 V CL19 for Synology NAS upgrades
This NEMIX RAM kit supplies 64GB across four 16GB DDR4 2666 modules built for Synology NAS units. Each stick is a 260-pin unbuffered ECC SODIMM running at 1.20V with CL19 latency and a 2Rx8 organisation. The modules use major OEM chips and are stress-tested for stability in always-on storage appliances.
The kit targets administrators who need to maximise the supported memory capacity of a compatible Synology model. Builders working with non-Synology platforms, desktop motherboards requiring registered DIMMs, or systems limited to lower-density modules should look elsewhere. The unbuffered ECC design will not function in servers that mandate registered memory.
The package delivers a pre-matched quad-channel set so the NAS can be populated in a single step without mixing revisions. No heat spreaders are included, keeping the low-profile form factor intact for tight drive-bay clearances. No additional software or configuration utilities are bundled; the memory is recognised automatically by the Synology firmware.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NEMIX RAM |
| Product line | Synology Compatible Series NAS Memory |
| Model name | Synology DDR4 2666 MHz ECC Unbuffered SODIMM |
| Part number | MSE21300-628K4 |
| Total capacity | 64 GB (4 × 16 GB) |
| Product type | 260-PIN DDR4 ECC SODIMM |
| Performance | |
| Rated speed | DDR4 2666 (PC4 21300) |
| Processor | |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Memory | |
| CAS latency | CL19 |
| ECC support | Yes |
| Buffer type | Unbuffered |
| Heat spreader | No |
| Memory rank | 2Rx8 |
| Power | |
| Rated voltage | 1.2 V |
| Compatibility | |
| Compatible systems | Synology |
| In the box | |
| Included items | 64 GB (4 × 16 GB) DDR4 2666 MHz PC4-21300 2Rx8 1.2 V CL19 260-PIN ECC Unbuffered SODIMM KIT |
The kit is built for Synology systems that use DDR4 2666 ECC unbuffered SODIMM modules; check your NAS manual for the exact model list.
Mixing different capacities and ranks is not recommended; for stable ECC operation populate all slots with identical 16 GB 2Rx8 modules.
After installation open the DSM Control Panel → Info Center → Memory; it should show 64 GB, 2666 MHz and ECC enabled.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?