NEMIX RAM 64GB (4x16GB) DDR4 3200 CL22 ECC UDIMM memory upgrade for THINKMATE XF4-14E3 Workstation

ThinkMate XF4-14E3 Workstation Kit

This NEMIX RAM kit supplies 64 GB of DDR4 ECC UDIMM memory built specifically for the ThinkMate XF4-14E3 workstation. Four 16 GB modules arrive ready to install in the system's 288-pin DIMM slots. The unbuffered design matches the platform's native memory architecture without requiring registered DIMM support. IT professionals and workstation operators gain a direct upgrade path validated for this exact model.

CL22 Latency at DDR4 3200 Speed

The modules run at DDR4 3200 (PC4-25600) with a CAS latency of 22 cycles. This timing is the decisive specification: the workstation's memory controller must accept CL22 at 3200 MT/s for the kit to operate at its rated speed. If the platform forces a lower frequency or tighter latency, the modules will down-clock accordingly. Buyers who need different latency or higher frequency should verify the system's qualified vendor list before ordering.

Four-Module Kit With No Heat Spreaders

The package contains four identical 16 GB UDIMMs totalling 64 GB; no additional cables, software or heat spreaders are included. The bare-module design keeps height low for dense workstation chassis but offers no thermal headroom beyond the 1.2 V JEDEC rating. Installers who prefer active cooling or aesthetic spreaders must source them separately. The kit's sole purpose is to populate four slots with matched, ECC-capable capacity.