Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 64 GB DDR5 registered ECC memory kit of four 16 GB modules running at 4800 MT/s with CL40 latency for SuperMicro X13SET-G and X13SET-GC motherboards
This 64GB kit contains four 16GB DDR5 4800 ECC registered DIMMs validated for SuperMicro X13SET-G and X13SET-GC motherboards. It targets administrators and integrators who need reliable, high-capacity memory for server and workstation workloads. The registered design with on-die ECC helps maintain data integrity under sustained load.
Each module uses a 288-pin RDIMM form factor and operates at 1.1V with CL40 latency. The 1Rx8 organisation and major OEM DRAM chips from Samsung, Micron or Hynix provide consistent electrical characteristics. No heat spreaders are fitted, so airflow across the PCB is unimpeded in dense chassis layouts.
Running at 1.1V reduces power draw per module compared with earlier DDR generations while delivering 4800 MT/s throughput. The absence of heat spreaders means thermal performance depends on case airflow, but registered buffering and ECC logic add minimal overhead. Under typical server loads the kit runs cool and quiet without active cooling on the memory itself.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NEMIX RAM |
| Product line | SuperMicro Server/Workstation Compatible Series Memory |
| Model name | SuperMicro DDR5 4800 MHz ECC RDIMM Registered Server Memory |
| Part number | MR38400-618K4 |
| Total capacity | 64 GB (4 × 16 GB) |
| Product type | 288-Pin DDR5 RDIMM |
| Performance | |
| Rated speed | DDR5 4800 (PC5 38400) |
| Processor | |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Memory | |
| CAS latency | CL40 |
| ECC support | Yes |
| Buffer type | Registered |
| Heat spreader | No |
| Memory rank | 1Rx8 |
| Power | |
| Rated voltage | 1.1 V |
| Compatibility | |
| Compatible systems | Supermicro |
| In the box | |
| Included items | 64 GB (4 × 16 GB) DDR5 4800 MHz PC5-38400 1Rx8 1.1 V CL40 288-PIN ECC RDIMM Registered Server Memory KIT |
The modules run at DDR5 4800 (PC5-38400) with CL40 latency and 1.1 V operation.
Yes, the kit is validated for the X13SET-G and X13SET-GC motherboards using the standard 288-pin DDR5 RDIMM slot.
Power off the server, open the chassis, align each module's notch with the slot key, press firmly until both retention clips click, then verify all four are recognised in BIOS.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?