We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green circuit boards with black memory chips and gold edge connectors lying flat

NEMIX RAM

NEMIX RAM 64GB (4x16GB) DDR5 5600 CL46 1.1V 288-pin UDIMM SuperMicro MBD-C9Z790-CGW memory upgrade

SKU CH-JNN2-3ZVJ5

64 GB kit of four 16 GB DDR5 5600 CL46 1.1 V 288-pin UDIMM modules validated for SuperMicro MBD-C9Z790-CGW workstations

  • Total capacity64 GB (4 × 16 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Buffer typeUnbuffered
  • Rated voltage1.1 V

Capacity 64GB 4X16GB

  • 64 GB kit expands workstation capacity
  • DDR5 5600 speed accelerates data throughput
  • CL46 latency sharpens response times
  • 10 V operation reduces power draw
  • Validated for SuperMicro MBD-C9Z790-CGW compatibility

64 GB DDR5 kit for Supermicro MBD-C9Z790-CGW

This 64 GB kit contains four 16 GB DDR5 5600 UDIMM modules built for the Supermicro MBD-C9Z790-CGW motherboard. The memory runs at 1.1 V with CL46 latency and uses a 288 pin unbuffered non ECC design. It is aimed at professionals who need a validated capacity increase for this specific workstation platform.

Suited for MBD-C9Z790-CGW upgrades only

The kit matches the board's DDR5 5600 specification and 1Rx8 rank layout so it installs without configuration changes. Builders using a different motherboard chipset or requiring ECC registered modules should look elsewhere because this memory is not validated for those platforms.

DDR5 5600 CL46 at 1.1 V decides fit

The single specification that determines compatibility is the DDR5 5600 CL46 1.1 V UDIMM profile. If the target system demands a different speed voltage or latency the modules will not operate as intended.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $815.99
Pricier than about 58% of the 21,161 comparable items (median $397.99).
Total capacity 64 GB (4 × 16 GB)
Higher than about 60% of the 20,941 comparable items (median 32 GB).
Price per GB $12.75 per GB
Pricier than about 59% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineSuperMicro Server/Workstation Compatible Series Memory
Model nameSuperMicro DDR5 5600 MHz Non-ECC Unbuffered UDIMM
Part numberMD44800-618K4
Total capacity64 GB (4 × 16 GB)
Product type288-Pin DDR5 UDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank1Rx8
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items64 GB (4 × 16 GB) DDR5 5600 MHz PC5-44800 1Rx8 1.1 V CL46 288-PIN Non-ECC Unbuffered UDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Should I pick the 64GB kit or look for a different capacity?

This kit provides 64GB total as four 16GB modules, matching the board's four DDR5 slots for full population.

What does the 5600 speed rating mean once the memory is installed?

The modules run at DDR5 5600 (PC5 44800) with CL46 latency at 1.10V, delivering the rated throughput when the motherboard enables the standard profile.

Is the 288-pin UDIMM interface the limiting factor for speed or capacity?

The 288-pin DDR5 UDIMM form factor supports this 5600 CL46 kit; the board's memory controller and BIOS determine the maximum stable frequency.

More in Model-Specific Memory Upgrades

Similar items