We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 UDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM 64GB (4x16GB) DDR5 5600 CL46 UDIMM Kit for Supermicro X13SAW-TLN4F

SKU CH-6036-SCJC0

A 64GB kit of four 16GB DDR5 5600 CL46 UDIMM modules built for the Supermicro X13SAW-TLN4F motherboard

  • Total capacity64 GB (4 × 16 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeUnbuffered

Size 64GB 4X16GB

  • 64 GB total capacity across four 16 GB modules for high-density desktop workloads
  • DDR5 5600 speed (PC5-44800) delivers rated bandwidth for the Supermicro X13SAW-TLN4F
  • CL46 CAS latency and 1.10 V operation match the board's memory controller expectations
  • 288-pin unbuffered non-ECC UDIMM form factor fits the motherboard's DIMM slots exactly
  • Built with major OEM chips from Samsung, Micron or Hynix and tested for stability

Precise DDR5-5600 kit for Supermicro X13SAW-TLN4F

This 64GB kit delivers four 16GB UDIMMs rated at DDR5 5600 with CL46 latency. It matches the exact rank, voltage, and timing the Supermicro X13SAW-TLN4F memory controller expects for full-capacity recognition at rated speed. Builders upgrading that specific motherboard receive a verified fit without guesswork.

Thermals and power at 1.10V

Operating at 1.10V, the unbuffered modules draw minimal power and generate low heat under normal workloads. No heat spreaders are fitted, so airflow across the 288-pin DIMMs is sufficient for stable operation. The major OEM chips from Samsung, Micron, or Hynix are tested for stability at the rated speed and timing.

1Rx8 Non-ECC UDIMM constraint

The kit uses 1Rx8 Non-ECC unbuffered DDR5, which is the only module type this motherboard accepts in its memory slots. ECC registered DIMMs or SODIMMs will not work. Buyers needing ECC error correction or a different form factor must select a different product.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $910.99
Pricier than about 60% of the 21,161 comparable items (median $397.99).
Total capacity 64 GB (4 × 16 GB)
Higher than about 60% of the 20,941 comparable items (median 32 GB).
Price per GB $14.23 per GB
Pricier than about 61% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR5 Non-ECC Unbuffered UDIMM Memory
Part numberMD44800-618K4
Total capacity64 GB (4 × 16 GB)
Product type288-Pin DDR5 UDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportNo
Buffer typeUnbuffered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items64 GB 4 × 16 GB DDR5 5600 MHz PC5-44800 1Rx8 1.1 V 288-PIN Non-ECC UDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

How do I install the 4x16GB DDR5 5600 UDIMM kit in the Supermicro X13SAW-TLN4F, and what step is often missed?

Power off the system, open the chassis, and insert each 288-pin module into the slots specified by the motherboard manual in the correct population order; the step most often missed is consulting that manual for the approved DIMM sequence before installation.

What maintenance or replacement will the 64GB DDR5 kit need over time?

The modules have no heat spreaders and no moving parts, so no periodic maintenance is required; replacement is only necessary if a module fails, which is covered by the lifetime replacement warranty.

What limit appears first when the 1Rx8 CL46 1.1V DDR5 kit runs under sustained load?

The primary limit is the fixed CAS latency of CL46 at the rated 5600 MT/s speed; without overclocking headroom or XMP profiles, the modules cannot exceed this timing under continuous operation.

More in Model-Specific Memory Upgrades

Similar items