We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 64GB DDR5 4800 2Rx4 CL40 288-Pin ECC RDIMM HPE P43331-K21 memory upgrade

SKU CH-3Q9S-7DH7A

64 GB DDR5 4800 ECC registered RDIMM for HPE servers, CL40 2Rx4 at 1.1 V

  • Total capacity64 GB
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Buffer typeRegistered
  • Rated voltage1.1 V
  • 64 GB capacity for large server workloads
  • DDR5 4800 speed for high bandwidth
  • ECC registered design protects data integrity
  • 1 V operation reduces power draw
  • 2Rx4 288-pin RDIMM fits HPE P43331-K21 systems

HPE Server Memory Upgrade

This 64GB DDR5 module is built for HPE servers and workstations that require registered ECC memory. It delivers 4800 MT/s speed with CL40 latency in a single 288-pin RDIMM. The 2Rx4 organisation suits high-density configurations.

Thermals and Power Profile

Operating at 1.1V, the module runs without a heat spreader and relies on chassis airflow. Registered buffering reduces electrical load on the memory controller during sustained workloads. ECC circuitry adds minimal overhead while correcting single-bit errors.

Capacity and Rank Constraint

The 64GB 2Rx4 density fits one slot but demands a platform qualified for this rank structure. Systems limited to 1Rx4 or 2Rx8 modules will not accept it. Verify the motherboard memory guide before purchase.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $1,593.99
Pricier than about 65% of the 21,161 comparable items (median $397.99).
Total capacity 64 GB
Higher than about 60% of the 20,941 comparable items (median 32 GB).
Price per GB $24.91 per GB
Pricier than about 69% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineHPE Server/Workstation Compatible Series Memory
Model nameHPE DDR5 4800 MHz ECC RDIMM Registered Server Memory
Part numberMR38400-924K1
Total capacity64 GB
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportYes
Buffer typeRegistered
Heat spreaderNo
Memory rank2Rx4
Power
Rated voltage1.1 V
Compatibility
Compatible systemsHPE
In the box
Included items64 GB (1 × 64 GB) DDR5 4800 MHz PC5-38400 2Rx4 1.1 V CL40 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

How do I install this 288-pin DDR5 RDIMM in an HPE server, and what step is often missed?

Power down the server, open the chassis, align the notch on the 288-pin module with the slot key, press firmly until both ejector clips click shut, then verify in BIOS that the 64GB module registers at 4800MT/s with ECC active; the step often missed is seating the module fully so both clips engage.

What maintenance or replacement will this 1.10V registered ECC module need over its service life?

No scheduled maintenance is required; the module has no heat spreader and runs at 1.10V, so keep server airflow clean and monitor corrected ECC counts in the management console — if uncorrectable errors appear, replace the DIMM.

What limit appears first when this CL40 2Rx4 module runs sustained workloads?

The CAS latency of CL40 at 4800MT/s sets the timing floor; under sustained load the memory controller will hit latency-bound throughput before thermal or voltage limits become a factor.

More in Model-Specific Memory Upgrades

Similar items