Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 64 GB DDR5 4800 ECC registered DIMM with CL40 latency, 1.1 V operation and 2Rx4 organisation for Dell Precision 7875 workstations
This 64GB DDR5 ECC RDIMM module is built for the Dell Precision Workstation 7875. It provides registered, error-correcting memory for workloads that require data integrity. The single 64GB stick uses a 2Rx4 organisation and runs at 4800 MT/s with CL40 latency.
The module operates at 1.10V without a heat spreader. Registered buffering reduces electrical load on the memory controller during sustained server or workstation tasks. Power consumption scales with the 4800 MT/s data rate and the 2Rx4 rank configuration under normal operating conditions.
The box contains one 288-pin DDR5 RDIMM rated PC5-38400. No additional cables, software or cooling hardware are bundled. Compatibility is validated for the Dell Precision 7875, so installation follows the system manufacturer's standard memory upgrade procedure.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NEMIX RAM |
| Product line | Dell Server/Workstation Compatible Series Memory |
| Model name | Dell DDR5 4800 MHz ECC RDIMM Registered Server Memory |
| Part number | MR38400-924K1 |
| Total capacity | 64 GB |
| Product type | 288-Pin DDR5 RDIMM |
| Performance | |
| Rated speed | DDR5 4800 (PC5 38400) |
| Processor | |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Memory | |
| CAS latency | CL40 |
| ECC support | Yes |
| Buffer type | Registered |
| Heat spreader | No |
| Memory rank | 2Rx4 |
| Power | |
| Rated voltage | 1.1 V |
| Compatibility | |
| Compatible systems | Dell |
| In the box | |
| Included items | 64 GB (1 × 64 GB) DDR5 4800 MHz PC5-38400 2Rx4 1.1 V CL40 288-PIN ECC RDIMM Registered Server Memory |
Align the notch on the 288-pin module with the slot key, press firmly until both retention clips click, then verify in BIOS that the 4800 speed and ECC are recognised.
No scheduled maintenance is required; if a correctable error count rises or the module fails, replace it with another DDR5 4800 CL40 1.1V RDIMM of the same capacity and rank.
The CL40 latency at 4800 MT/s sets the throughput ceiling; sustained heavy loads will hit that timing boundary before voltage or thermal limits become a factor.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?