We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Single green DDR5 RDIMM module 64GB 5600 CL46 288-pin no heat spreader

NEMIX RAM

NEMIX RAM 64GB DDR5 5600 CL46 2Rx4 1.1V ECC RDIMM 288-PIN B13SEE-CPU-25G memory upgrade

SKU CH-MT9T-B5EQG

A 64 GB DDR5 registered ECC module running at 5600 MT/s with CL46 latency and 1.1 V operation for Supermicro servers

  • Total capacity64 GB
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Buffer typeRegistered
  • Rated voltage1.1 V
  • 64GB single-module capacity for dense server memory configurations
  • DDR5 5600 speed with CL46 latency for high-throughput workloads
  • ECC registered design detects and corrects data errors in mission-critical systems
  • 1V operating voltage reduces power draw in 24/7 server environments
  • Validated for Supermicro B13SEE-CPU-25G motherboard compatibility

64GB DDR5 ECC RDIMM for SuperMicro B13SEE-CPU-25G

This 64GB DDR5 5600MHz registered DIMM is built for SuperMicro B13SEE-CPU-25G motherboards. It targets server and workstation administrators who require error-correcting memory for stable, continuous operation in enterprise environments.

Capacity and headroom at CL46 1.1V

A single 64GB 2Rx4 module delivers high density per slot, letting you reach large system totals on boards with limited DIMM count. The CL46 latency and 1.1V operation suit standard DDR5 5600 workloads; bandwidth-sensitive tasks that demand lower latency or higher frequencies will hit the module's specified limits.

Registered ECC fit for 288-pin DDR5 slots

The module plugs directly into 288-pin DDR5 RDIMM slots and uses the registered buffer to reduce electrical load on the memory controller. It requires a platform that supports DDR5 ECC registered memory; consumer desktop boards and non-ECC channels cannot use it. No heat spreader is fitted, so airflow in the chassis must be adequate for sustained loads.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $1,760.99
Pricier than about 66% of the 21,161 comparable items (median $397.99).
Total capacity 64 GB
Higher than about 60% of the 20,941 comparable items (median 32 GB).
Price per GB $27.52 per GB
Pricier than about 77% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineSuperMicro Server/Workstation Compatible Series Memory
Model nameSupermicro DDR5 4800 MHz ECC RDIMM Registered Server Memory
Part numberMR44800-924K1
Total capacity64 GB
Product type288-PIN DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Heat spreaderNo
Memory rank2Rx4
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items64 GB (1 × 64 GB) DDR5 5600 MHz PC5-44800 2Rx4 1.1 V CL46 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

Will this 5600 MHz DDR5 RDIMM downclock to 4800 MHz if I keep older DDR5 modules in the same SuperMicro B13SEE-CPU-25G system?

The module is rated for 5600 MHz PC5-44800 and will run at the highest common speed supported by the memory controller and any installed modules.

How can I confirm the ECC registered RDIMM is operating correctly after installation?

Check the BIOS or system management interface for the 64 GB capacity, 2Rx4 organisation, CL46 latency, 1.10 V voltage and ECC status showing enabled.

Does the single 64 GB stick ship with a heat spreader or any extra cables I need to buy separately?

The package contains only the 288-pin DDR5 RDIMM; no heat spreader is included and no additional cables are required for installation.

More in Model-Specific Memory Upgrades

Similar items