We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green DDR5 RDIMM module with black chips no heat spreader 288 pins

NEMIX RAM

NEMIX RAM 64GB DDR5 5600MHz CL46 ECC Registered RDIMM memory upgrade

SKU CH-4DAD-86BDG

64GB DDR5 5600MHz ECC Registered RDIMM with CL46 latency, 1.1V operation, and 2Rx4 rank for Supermicro H13DSG-O-CPU motherboards

  • Total capacity64 GB
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • Exact DDR5-5600 CL46 1.10V spec ensures full-speed recognition
  • 64GB 2Rx4 registered ECC design prevents silent data corruption
  • 288-pin RDIMM form factor matches Supermicro H13DSG-O-CPU slots
  • Major-brand Samsung Micron Hynix chips deliver enterprise-grade stability
  • Lifetime replacement warranty with free US-based technical support

64 GB DDR5-5600 ECC RDIMM for Supermicro

This 64 GB DDR5-5600 registered ECC module is built for the Supermicro H13DSG-O-CPU motherboard. It delivers 1.1 V CL46 timing in a 2Rx4 288-pin RDIMM form factor. The exact rank, voltage and latency match the board's memory controller so the full capacity is recognised at rated speed.

Installation notes for registered DDR5 RDIMM

The module uses the 288-pin RDIMM keying required by this motherboard and will not fit UDIMM or SODIMM slots. Align the notch, press evenly until both retention clips engage, and follow the board's population order in the manual. A mismatch in rank, voltage or form factor is the usual cause of a no-post condition.

Suited for populated server builds.

Ideal for administrators filling every slot on a Supermicro H13DSG-O-CPU system where registered ECC stability is required. Builders using consumer desktop motherboards, workstations that need unbuffered UDIMMs, or laptops requiring SODIMMs should look at a different memory type.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $1,758.99
Pricier than about 66% of the 21,161 comparable items (median $397.99).
Total capacity 64 GB
Higher than about 60% of the 20,941 comparable items (median 32 GB).
Price per GB $27.48 per GB
Pricier than about 77% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-924K1
Total capacity64 GB
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items64 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Questions about this item

How can I confirm the 64GB DDR5 5600MHz CL46 RDIMM is running at its rated 5600 speed and 1.1V after installation?

Enter the BIOS or UEFI on the Supermicro H13DSG-O-CPU motherboard and verify the memory frequency reads 5600 MT/s (PC5-44800) with voltage at 1.1V and CL46 timings.

What ships in the box and is any extra hardware needed to install the 288-pin ECC Registered RDIMM?

The package contains the 64GB 2Rx4 DDR5 RDIMM module only; no heat spreader or additional cables are included, and the motherboard's DIMM slots provide the only required interface.

Should I choose the 64GB 2Rx4 CL46 version or a different capacity for the Supermicro H13DSG-O-CPU?

Select this 64GB 2Rx4 CL46 kit when your board's qualified-vendor list calls for a 288-pin Registered ECC DIMM at 1.1V; consult the motherboard manual for approved population order and maximum supported capacity per slot.

More in Model-Specific Memory Upgrades

Similar items