We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eight green DDR5 RDIMM sticks with gold contacts, no heat spreaders

NEMIX RAM

NEMIX RAM 768GB (8x96GB) DDR5 5600 CL46 2Rx4 ECC RDIMM Supermicro H13DSG-O-CPU

SKU CH-PHZT-FYDA8

Eight 96 GB DDR5 registered ECC modules deliver 768 GB at 5600 MT/s with CL46 timing for the Supermicro H13DSG-O-CPU motherboard

  • Total capacity768 GB (8 × 96 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 768 GB total capacity from eight 96 GB modules for dense server workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput for the platform
  • Registered ECC architecture corrects single-bit errors and supports full-slot population
  • 10 V operation matches the motherboard's memory controller specification
  • 288-pin RDIMM form factor verified for Supermicro H13DSG-O-CPU compatibility

Exact DDR5-5600 768GB Kit for Supermicro

This 8-module kit delivers 768GB of DDR5 5600 registered ECC memory built to the Supermicro H13DSG-O-CPU motherboard's precise specifications. Each 96GB 2Rx4 RDIMM operates at 1.1V with CL46 timing so the memory controller recognises full capacity at rated speed without manual tuning.

Registered ECC stability under full population

Registered buffering offloads the memory controller allowing all eight slots to run fully populated at DDR5 5600 without signal degradation. On-die ECC corrects single-bit errors in real time preventing silent data corruption and unplanned reboots during sustained server workloads.

Replaces mismatched or partial DIMM sets

The kit eliminates the risk of mixing ranks, voltages or timings that forces the system to downclock or reject modules. The jump is worth it when moving from incomplete populations or consumer UDIMMs that lack registered buffering and ECC for this platform.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $21,753.99
Pricier than about 92% of the 21,161 comparable items (median $397.99).
Total capacity 768 GB (8 × 96 GB)
Higher than about 92% of the 20,941 comparable items (median 32 GB).
Price per GB $28.33 per GB
Pricier than about 80% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-9624K8
Total capacity768 GB (8 × 96 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items768 GB 8 × 96 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Questions about this item

How much power does each 96 GB DDR5 5600 RDIMM draw at 1.1 V when the server runs continuously?

Each module operates at 1.10 V; total kit power depends on the platform's memory controller and workload, not on the DIMMs alone.

What motherboard slot type and population rules must the Supermicro H13DSG-O-CPU already have to accept this 8 x 96 GB kit?

The board needs 288-pin DDR5 RDIMM slots and must support 2Rx4 registered ECC modules in an 8-DIMM population per the manual.

Will these CL46 2Rx4 registered ECC modules run at 5600 MT/s alongside slower DDR5 RDIMMs already installed in the same server?

The memory controller will downclock all populated slots to the lowest common speed and latency, so mixed speeds run at the slowest module's rate.

More in Model-Specific Memory Upgrades

Similar items