We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR3 SODIMM modules with gold contacts

NEMIX RAM

NEMIX RAM 8GB (2x4GB) DDR3 1333 PC3-10600 1.35V 204-Pin SODIMM Kit POSIFLEX XT-5315 JIVA 15 memory upgrade

SKU CH-2H68-9X9BD

An 8 GB kit of two 4 GB DDR3 SODIMM modules running at 1333 MHz for the POSIFLEX XT-5315 JIVA 15 terminal

  • Total capacity8 GB (2 × 4 GB)
  • Rated speedDDR3 1333 (PC3 10600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL9
  • Buffer typeUnbuffered
  • Rated voltage1.5 V
  • Designed for POSIFLEX XT-5315 JIVA 15 terminal
  • 8GB kit (2x4GB) DDR3 1333 PC3-10600 speed
  • Low-voltage 1.35V DDR3 reduces power draw
  • 204-pin SODIMM fits compatible POS systems
  • Non-ECC unbuffered modules tested for stability

POSIFLEX XT-5315 JIVA 15 compatible kit

This 8 GB kit contains two 4 GB DDR3 SODIMM modules built for the POSIFLEX XT-5315 JIVA 15 terminal. It delivers a straightforward memory upgrade for point-of-sale systems needing more capacity. The 204-pin form factor matches the slots used in this hardware.

Low-voltage DDR3 operation

Each module runs at 1.35 V and 1333 MHz with CL9 latency, keeping power draw modest in a compact terminal chassis. Unbuffered, non-ECC chips generate minimal heat without a spreader, so fan noise stays low during typical retail workloads.

Ready-to-install dual-module kit

The package supplies a matched pair so both channels populate at once, avoiding single-channel bottlenecks. No extra cables, drivers or configuration tools are included; installation follows the terminal's own service guide.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $45.99
Cheaper than about 79% of the 21,161 comparable items (median $397.99).
Total capacity 8 GB (2 × 4 GB)
Lower than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $5.75 per GB
Cheaper than about 68% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product linePOSIFLEX POS Series Point of Sale Kiosk Memory
Model namePOSIFLEX POS DDR3 1333 MHz Non-ECC Unbuffered SODIMM
Part numberMS10600-428K2
Total capacity8 GB (2 × 4 GB)
Product type204-Pin DDR3 SODIMM
Performance
Rated speedDDR3 1333 (PC3 10600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL9
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.5 V
Compatibility
Compatible systemsPOSIFLEX POS
In the box
Included items8 GB (2 × 4 GB) DDR3 1333 MHz PC3-10600 2Rx8 1.35 V 204-PIN Non-ECC Unbuffered SODIMM KIT

Questions about this item

How do I install the 204-pin DDR3 SODIMM modules in the POSIFLEX XT-5315 JIVA 15 terminal, and what step is often missed?

Power off and unplug the terminal, open the memory compartment, align the notch on each 204-pin module with the slot key, insert at an angle then press down until the retention clips click; the step often missed is confirming both clips lock fully on each module.

What maintenance or replacement will this 2Rx8 DDR3 1333 kit need during its service life?

No scheduled maintenance is required; keep the terminal vents clear of dust so the unbuffered modules stay cool, and replace only if a module fails — the kit uses major OEM Samsung, Micron or Hynix chips rated for continuous operation.

What limit appears first when the POS terminal runs sustained workloads with this CL9 1.35 V memory?

The DDR3 1333 (PC3-10600) bandwidth ceiling is reached before the CAS latency or voltage becomes a bottleneck, so throughput tops out at the rated 1333 MT/s transfer rate under heavy load.

More in Model-Specific Memory Upgrades

Similar items