We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board SODIMM module with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 8GB DDR3 1333 204-Pin SODIMM POSIFLEX TK-3231 memory upgrade

SKU CH-ZK13-1VW76

An 8 GB DDR3 SODIMM module rated at 1333 MHz for upgrading POSIFLEX TK-3231 kiosk systems

  • Total capacity8 GB
  • Rated speedDDR3 1333 (PC3 10600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL9
  • Buffer typeUnbuffered
  • Rated voltage1.5 V
  • 8GB capacity expands POSIFLEX TK-3231 kiosk memory for heavier workloads
  • DDR3 1333MHz PC3-10600 speed matches system specification for stable operation
  • 35V low-voltage module reduces power draw in always-on terminals
  • 204-pin SODIMM form factor fits the kiosk memory slot without adapters
  • Non-ECC unbuffered design ensures direct compatibility with POSIFLEX Paragon Series motherboard

System-specific SODIMM for POSIFLEX TK-3231

This 8 GB DDR3 1333 module is built for the POSIFLEX TK-3231 Paragon Series kiosk. It fits the 204-pin SODIMM slot and runs at 1.35 V or 1.50 V without ECC or buffering. The single stick adds memory capacity to point-of-sale terminals that need a direct replacement.

Plug-and-play compatibility

The module uses major OEM chips from Samsung, Micron or Hynix and is stress-tested under load for stability. No extra software or drivers are required; installation follows the kiosk's own service manual. The 2Rx8 rank organisation matches the system's memory controller expectations.

Capacity and headroom

Eight gigabytes supports typical POS workloads such as transaction processing, inventory lookup and peripheral management. The CL9 latency and PC3-10600 bandwidth suit the platform's DDR3 1333 controller. Systems already at the board's maximum slot count or needing ECC registered memory cannot use this module.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $14.99
Cheaper than about 94% of the 21,161 comparable items (median $397.99).
Total capacity 8 GB
Lower than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $1.87 per GB
Cheaper than about 94% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product linePOSIFLEX POS Series Point of Sale Kiosk Memory
Model namePOSIFLEX POS DDR3 1333 MHz Non-ECC Unbuffered SODIMM
Part numberMS10600-828K1
Total capacity8 GB
Product type204-Pin DDR3 SODIMM
Performance
Rated speedDDR3 1333 (PC3 10600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL9
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.5 V
Compatibility
Compatible systemsPOSIFLEX POS
In the box
Included items8 GB (1 × 8 GB) DDR3 1333 MHz PC3-10600 2Rx8 1.35 V 204-PIN Non-ECC Unbuffered SODIMM

Questions about this item

Will the 2Rx8 DDR3 SODIMM need any firmware updates or periodic reseating after installation?

No firmware updates are required for this Non-ECC Unbuffered module. Once seated in the 204-pin slot it remains stable for the system's service life.

What limit appears first when the POSIFLEX TK-3231 runs continuous workloads on this 8GB DDR3 1333 CL9 stick?

The 8GB capacity ceiling is reached before bandwidth or latency constraints, so sustained multitasking will hit the size limit first.

How much heat and power does the 1.35V 2Rx8 module add when the kiosk operates all day?

At 1.35V the module draws low power and produces minimal heat; no spreader is fitted because thermal output stays well within SODIMM limits.

More in Model-Specific Memory Upgrades

Similar items