We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 204-pin DDR3 SODIMM module with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR3 1333 2Rx8 1.35V 204-PIN SODIMM POSIFLEX PS-3516 memory upgrade

SKU CH-RJE4-FN0BP

8GB DDR3 SODIMM running at 1333MHz with CL9 latency for POSIFLEX PS-3516 terminals

  • Total capacity8 GB
  • Rated speedDDR3 1333 (PC3 10600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL9
  • Buffer typeUnbuffered
  • Rated voltage1.5 V
  • Designed for POSIFLEX PS-3516 terminals
  • DDR3 1333 MHz CL9 for responsive operation
  • 8 GB single module expands capacity
  • Low-voltage 1.35 V reduces power draw
  • Built with Samsung, Micron or Hynix chips

POSIFLEX PS-3516 memory upgrade

This 8 GB DDR3 SODIMM is built for the POSIFLEX PS-3516 fanless point-of-sale terminal. It delivers 1333 MHz speed with CL9 latency in a single 204-pin module that fits the system’s SO-DIMM slot. The non-ECC unbuffered design matches the original specification for reliable operation in retail and kiosk environments.

Retail operators needing a direct replacement

This module suits technicians upgrading or repairing a PS-3516 terminal that requires DDR3 1333 memory at 1.35 V. It is not for builders working on consumer laptops or desktops that need standard 1.50 V DDR3 or a different pin count. Buyers who want ECC error correction or registered buffering must choose a different part.

1.35 V low-voltage DDR3 specification

The memory runs at 1.35 V, which is the decisive electrical requirement for the PS-3516 platform. A standard 1.50 V DDR3 SODIMM will not meet the terminal’s power envelope and can cause instability. Confirm the 1.35 V rating before ordering to ensure compatibility.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $14.99
Cheaper than about 94% of the 21,161 comparable items (median $397.99).
Total capacity 8 GB
Lower than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $1.87 per GB
Cheaper than about 94% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product linePOSIFLEX POS Series Point of Sale Kiosk Memory
Model namePOSIFLEX POS DDR3 1333 MHz Non-ECC Unbuffered SODIMM
Part numberMS10600-828K1
Total capacity8 GB
Product type204-Pin DDR3 SODIMM
Performance
Rated speedDDR3 1333 (PC3 10600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL9
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.5 V
Compatibility
Compatible systemsPOSIFLEX POS
In the box
Included items8 GB (1 × 8 GB) DDR3 1333 MHz PC3-10600 2Rx8 1.35 V 204-PIN Non-ECC Unbuffered SODIMM

Questions about this item

How do I install this 204-pin SODIMM in the POSIFLEX PS-3516, and which step is often missed?

Power off the terminal, remove the access panel, align the notch on the module with the slot key, insert at an angle, then press down firmly until both side clips click into place; the step most people miss is verifying both clips have fully latched.

What maintenance or replacement will this 8GB DDR3 module need over time?

No scheduled maintenance is required; if the terminal later shows memory errors or fails to POST, replace the module with an identical 2Rx8 1.35V DDR3 SODIMM.

What limit appears first when this CL9 memory runs sustained workloads in the fanless POSIFLEX PS-3516?

The thermal limit of the fanless chassis is reached first, causing the memory to throttle or the system to shut down before the module hits its own electrical limits.

More in Model-Specific Memory Upgrades

Similar items