We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 204-pin DDR3 SODIMM module with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR3 1333 PC3-10600 1.35V 204-Pin SODIMM POSIFLEX TK-2131 memory upgrade

SKU CH-A658-HE1V4

8 GB DDR3 1333 SODIMM for POSIFLEX TK-2131 kiosk, 1.35 V non-ECC unbuffered memory

  • Total capacity8 GB
  • Rated speedDDR3 1333 (PC3 10600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL9
  • Buffer typeUnbuffered
  • Rated voltage1.5 V
  • 8 GB capacity lets POSIFLEX TK-2131 kiosks handle heavier transaction loads
  • DDR3 1333 MHz speed matches the system bus for stable operation
  • 35 V low-voltage design reduces power draw in always-on terminals
  • 204-pin SODIMM form factor fits the kiosk memory slot without adapters
  • Non-ECC unbuffered modules install in minutes with no configuration required

Targeted POS memory upgrade

This 8 GB DDR3 SODIMM is built for the POSIFLEX TK-2131 Stellar Series kiosk. It fits the 204-pin slot and runs at 1333 MHz with a CAS latency of CL9. The module is non-ECC and unbuffered, matching the original system specification.

Sustained-load behaviour

Rigorous stress testing under load is performed on every stick before it ships. The 1.35 V operating voltage helps keep thermals stable during continuous point-of-sale operation. Major OEM chips from Samsung, Micron or Hynix provide consistent throughput for long shifts.

DDR3 interface limits

The PC3-10600 standard caps bandwidth at the rated 1333 MT/s, so this module cannot exceed that ceiling. It is a single 8 GB rank of 2Rx8 organisation and does not support ECC error correction. Systems requiring registered memory or a different voltage will not accept it.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $17.99
Cheaper than about 92% of the 21,161 comparable items (median $397.99).
Total capacity 8 GB
Lower than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $2.25 per GB
Cheaper than about 93% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product linePOSIFLEX POS Series Point of Sale Kiosk Memory
Model namePOSIFLEX POS DDR3 1333 MHz Non-ECC Unbuffered SODIMM
Part numberMS10600-828K1
Total capacity8 GB
Product type204-Pin DDR3 SODIMM
Performance
Rated speedDDR3 1333 (PC3 10600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL9
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.5 V
Compatibility
Compatible systemsPOSIFLEX POS
In the box
Included items8 GB (1 × 8 GB) DDR3 1333 MHz PC3-10600 2Rx8 1.35 V 204-PIN Non-ECC Unbuffered SODIMM

Questions about this item

How much power does the 1.35 V DDR3 SODIMM draw when the POSIFLEX TK-2131 kiosk runs continuously?

The module operates at 1.35 V, which is lower than standard 1.50 V DDR3, reducing heat output during all-day operation.

What must the POSIFLEX TK-2131 already have for this 204-pin DDR3 1333 upgrade to work?

An available 204-pin DDR3 SODIMM slot that accepts 1.35 V non-ECC unbuffered memory at PC3-10600 speed.

Will this CL9 DDR3 1333 stick run alongside the original memory already in the TK-2131?

Yes, it is designed for the POSIFLEX TK-2131 Stellar Series and matches the system's DDR3 1333 specification.

More in Model-Specific Memory Upgrades

Similar items