We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board SODIMM module with black memory chips, gold edge connector, 204 pins

NEMIX RAM

NEMIX RAM 8GB DDR3 1333 PC3-10600 2Rx8 1.35V 204-Pin SODIMM POSIFLEX KS-7412

SKU CH-QJQ0-Z24NV

8GB DDR3 1333 SODIMM for POSIFLEX KS-7412 terminal, 1.35V low voltage, CL9 latency

  • Total capacity8 GB
  • Rated speedDDR3 1333 (PC3 10600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL9
  • Buffer typeUnbuffered
  • Rated voltage1.5 V
  • 8 GB capacity expands POS terminal multitasking headroom
  • DDR3 1333 speed matches system bus for stable operation
  • 35 V low-voltage design reduces power draw and heat
  • 204-pin SODIMM form factor fits POSIFLEX KS-7412 slot directly
  • 2Rx8 dual-rank organisation optimises memory controller efficiency

POSIFLEX KS-7412 targeted upgrade

This SODIMM is built specifically for the POSIFLEX KS-7412 compact fanless point-of-sale terminal. It provides 8GB of DDR3 memory in a single 204-pin module that matches the system's original specification. The part is intended for technicians maintaining or expanding these kiosk platforms.

Steady operation under continuous duty

The module runs at 1333 MT/s with CL9 latency and operates at 1.50V, delivering consistent throughput during long transaction cycles. Major OEM DRAM from Samsung, Micron or Hynix is stress-tested under load to sustain stability in always-on retail environments. Unbuffered non-ECC organisation keeps latency low for the terminal's embedded workload.

Direct-fit 204-pin form factor

The stick uses a standard 204-pin DDR3 SODIMM edge connector with no heat spreader, allowing it to slide into the KS-7412's tight internal slot without clearance issues. Rank is 2Rx8, matching the platform's memory controller expectations. Installation follows the terminal's service manual and requires no additional cabling or brackets.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $14.99
Cheaper than about 94% of the 21,161 comparable items (median $397.99).
Total capacity 8 GB
Lower than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $1.87 per GB
Cheaper than about 94% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product linePOSIFLEX POS Series Point of Sale Kiosk Memory
Model namePOSIFLEX POS DDR3 1333 MHz Non-ECC Unbuffered SODIMM
Part numberMS10600-828K1
Total capacity8 GB
Product type204-Pin DDR3 SODIMM
Performance
Rated speedDDR3 1333 (PC3 10600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL9
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.5 V
Compatibility
Compatible systemsPOSIFLEX POS
In the box
Included items8 GB (1 × 8 GB) DDR3 1333 MHz PC3-10600 2Rx8 1.35 V 204-PIN Non-ECC Unbuffered SODIMM

Questions about this item

Does the 1.35 V rating keep heat and power draw low during continuous POS terminal operation?

The module runs at 1.35 V, reducing power consumption and thermal output compared to standard 1.50 V DDR3, which helps the fanless KS-7412 stay cool during all-day use.

What must the POSIFLEX KS-7412 already have for this 204-pin SODIMM to install and function?

The terminal needs a free DDR3 SODIMM slot that accepts 2Rx8 unbuffered non-ECC modules at 1333 MHz; no additional hardware or adapters are required.

Will this 8 GB DDR3 1333 stick work alongside the original 4 GB module already in my KS-7412?

Yes, it is compatible with the KS-7412 and will run in dual-channel mode if the existing module is also DDR3 1333 CL9 unbuffered non-ECC, otherwise the system will operate at the slower module's speed.

More in Model-Specific Memory Upgrades

Similar items